Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: film/digital sensitivity  (Read 1912 times)
marc gerritsen
Sr. Member
****
Offline Offline

Posts: 299


WWW
« on: September 20, 2006, 09:19:48 AM »
ReplyReply

Just took out my old trusted minolta V lightmeter to do some spot metering.
I thought that my digital Hasselblad would read the light more or less the same
as the minolta but I had to put my lightmeter at 20 iso when my Hasselblad
was set at 50 iso for the same speed and light.
Is my suspicion now finally confirmed that my digital is less sensitive to light as film?
Have you guys done similar calibrations and if yes, are your settings comparable?
just wondering.
Marc
Logged

damien
Full Member
***
Offline Offline

Posts: 111


WWW
« Reply #1 on: September 20, 2006, 06:14:09 PM »
ReplyReply

Film speed was always a strange issue to explain. The system of deriving an ISO value was determined by the threshold at which a certain level of reaction occured in the emulsion. It had very little to do with what setting to use to obtain a good exposure. Hence I used to shoot my Velvia at 40 ISO and Provia 100 at 125. With digital backs the point at which shadow detail is rendered happens earlier due to the higher dynamic range hence manufacturers have to use the word "equivelent" when quoting ISO values. In practice I'm using similar exposure settings that I used to and my Nikon and Phase back correlate. I sold my Minolta spotmeter when I went digital as it was rendered useless. I now asses exposure using the actual picture. I hope this helps.

Damien.
Logged

www.lovegroveportraits.com
www.lovegroveweddings.com
www.lovegroveconsulting.com
H1/P25 -35mm,80mm,100mm,210mm
Nikon D200 - 17-35,28-70,70-200VR all at f2.8
Canon 5D - 16-35,24-70,70-200IS all at f2.8
Ex Rollei 6008 kit, Hass V kit, Mamiya 645 pro TL kit.
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad