Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Advice on ink for epson 7800  (Read 3049 times)
jorgedelfino
Jr. Member
**
Offline Offline

Posts: 90


WWW
« on: November 04, 2006, 11:20:12 AM »
ReplyReply

I have a epson 7800 , here,( in santiago, chile), there is a company that sells  some clear plastic cartridges that you refill with some ink the sell you,
they say that since the cartridges dont have any foam inside you can fill them with up to 250 ml, the ink has no brand on the bottle other than their company logo, TIMG, they claim is just like epson ultrachrome..... the only thing I found was that the ink and cartridges are made in korea..... once you buy the empty cartridges, (about $ 60 each), the ink is dirt cheap, ( $ 25 for one pint).
here, original epson 220ml ink sells for $ 110..
this company TIMG is big down here on the small cartridge refilling bussines, but I have a $ 3.000 printer!
advice?
Logged
alainbriot
Sr. Member
****
Offline Offline

Posts: 675



WWW
« Reply #1 on: November 04, 2006, 12:22:02 PM »
ReplyReply

Quote
I have a epson 7800 , here,( in santiago, chile), there is a company that sells  some clear plastic cartridges that you refill with some ink the sell you,
they say that since the cartridges dont have any foam inside you can fill them with up to 250 ml, the ink has no brand on the bottle other than their company logo, TIMG, they claim is just like epson ultrachrome..... the only thing I found was that the ink and cartridges are made in korea..... once you buy the empty cartridges, (about $ 60 each), the ink is dirt cheap, ( $ 25 for one pint).
here, original epson 220ml ink sells for $ 110..
this company TIMG is big down here on the small cartridge refilling bussines, but I have a $ 3.000 printer!
advice?
[a href=\"index.php?act=findpost&pid=83619\"][{POST_SNAPBACK}][/a]

For one you will need to create all new profiles for this new ink... For two, how do you know these inks are similar to K3 inks? Personally, I found long ago that the monetary savings on 3rd party inks were not worth the induced problems.  Your conclusions may be different.
« Last Edit: November 04, 2006, 12:38:45 PM by alainbriot » Logged

Alain Briot
Author of Mastering Landscape Photography, Mastering Composition, Creativity and Personal Style., Marketing Fine Art Photography and How Photographs are Sold.
http://www.beautiful-landscape.com
pixtweak
Newbie
*
Offline Offline

Posts: 24


« Reply #2 on: November 05, 2006, 02:32:22 AM »
ReplyReply

Quote
I have a epson 7800 , here,( in santiago, chile), there is a company that sells  some clear plastic cartridges that you refill with some ink the sell you,
they say that since the cartridges dont have any foam inside you can fill them with up to 250 ml, the ink has no brand on the bottle other than their company logo, TIMG, they claim is just like epson ultrachrome..... the only thing I found was that the ink and cartridges are made in korea..... once you buy the empty cartridges, (about $ 60 each), the ink is dirt cheap, ( $ 25 for one pint).
here, original epson 220ml ink sells for $ 110..
this company TIMG is big down here on the small cartridge refilling bussines, but I have a $ 3.000 printer!
advice?
[a href=\"index.php?act=findpost&pid=83619\"][{POST_SNAPBACK}][/a]

You will be completely undermining the integrity of your system by using other inks, and  will be defeating the purpose of investing in this printer.  As mentioned none of the Epson profiles will be of use anymore and just as importantly you will be losing all the support in terms of profiles available from Bill Atkinson, paper profiles for Epson printers from paper manufacturers, and compatibillity with just about everything else.  You are right you have a $3,000 printer,  and INK that is supported by more 3rd parties than any other printer in this price range. Short of taking a sledge hammer to it, using cheap ink in it is the next best way to make it worthless that I can think of.
Logged
jorgedelfino
Jr. Member
**
Offline Offline

Posts: 90


WWW
« Reply #3 on: November 05, 2006, 07:43:21 AM »
ReplyReply

Quote
For one you will need to create all new profiles for this new ink... For two, how do you know these inks are similar to K3 inks? Personally, I found long ago that the monetary savings on 3rd party inks were not worth the induced problems.  Your conclusions may be different.
[{POST_SNAPBACK}][/a]

I did ask them about ink profiles and they say ”don’t worry” is the very same ink used by Epson… something I find hard to believe, but what bothers  me the most is the actual “handling” of the ink, a funnel! I mean, how clean can it be?
Anyway, thanks for the advice, I’ll dig for the $110 each…
By the way here is the page for them;

[a href=\"http://www.sistemacontinuo.cl/]http://www.sistemacontinuo.cl/[/url]
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad