Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Is the HP DJ a good compliment to 4800 or iP5000?  (Read 1883 times)
neil snape
Sr. Member
****
Offline Offline

Posts: 1432


WWW
« on: November 24, 2006, 04:55:10 AM »
ReplyReply

Kenny wrote a PM that could not be replied to from LL;
> Neil,
> I currently own an Epson 4800. I do travel quite a bit of traveling for work,
> and am frustrated that every time I turn the machine on, I have to run thru a
> number of clean cycles to get the printer to work properly. I have decided to
> either trade or sell the printer. In the past I've read your posts regarding
> the HP130. It seems that a lot of people are jumping on the Canon 5000
> bandwagon. I'm using a Macbook Pro with another monitor. I print Black & White
> and color, I make my own profiles. Do you feel the HP would be a good
> alternative to the Canon.

I wrote:
It is still my favorite printer. Mine is however collecting dust as I have so much testing to do on the Z series HP's and continuing 9180 testing.
The 130 never needs any cleaning. Even after being off for months there are no cleaning cycles needed. Clogs just do not happen, ever.
The fade resistance is in the same running as Epson pigments on color but only on the HP Satin or Glossy swellable polymer media.
The gamut is around right for photo repro. The prints are closer to a darkroom than any other printer I know. And it runs at about half the cost of an Epson 4800, if 110ml carts.
The ip5000 is a higher gamut true pro printer as much so as a 4800. The 130 isn't designed to do much more than photo repro on roll or sheet. For a vast media choice pigment printers are required.

The samples I have from the 5000 are not very good but I saw prints from John Huba at PPE that were really top notch. The only thing Canon should have done is put a gloss enhancer in.
Logged
tbonanno
Full Member
***
Offline Offline

Posts: 100


WWW
« Reply #1 on: November 24, 2006, 02:29:23 PM »
ReplyReply

To Kenny,

Your travel sounds like mine.  I did a two week shoot in Paris in Oct and just returned from two weeks in Australia.  Each time I returned to the studio, I just turned on the iPF5000 and started printing.  NO nozzle issues or any other problems at all.  Not a single nozzle clog.  I could never have done that with my Epson machines.

I have to admit that the HP's sound very good too.  And maybe the new Epsons will be great.  But at the present moment, the Canon is working very well for me.  For what its worth...

Tony
Logged

Tony Bonanno Photography
ASMP General Member
Santa Fe, New Mexico
http://www.bonannophoto.com
kjdmorse
Newbie
*
Offline Offline

Posts: 3


« Reply #2 on: November 24, 2006, 07:27:21 PM »
ReplyReply

Neil and Tony,
Thank you for your response.
Kenny
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad