Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Z3100 & ONYX Production House  (Read 2356 times)
Lara S
Newbie
*
Offline Offline

Posts: 1


« on: February 19, 2007, 12:46:32 PM »
ReplyReply

Is anyone using ONYX Production House as the Rip for the Z3100 printer?

I'm having issues with bi-directional banding (cannot turn bi-directional off)
and...
Gloss enhancer. Cannot access option to turn it on in ONYX.
Logged
inkwelleditions
Newbie
*
Offline Offline

Posts: 7


WWW
« Reply #1 on: February 20, 2007, 12:12:08 AM »
ReplyReply

Quote
Is anyone using ONYX Production House as the Rip for the Z3100 printer?

I'm having issues with bi-directional banding (cannot turn bi-directional off)
and...
Gloss enhancer. Cannot access option to turn it on in ONYX.
[a href=\"index.php?act=findpost&pid=101691\"][{POST_SNAPBACK}][/a]

Lara,

I was using it about 6 hours ago. Make sure you use Hi-pass, you can also manually sett the number of passes (8-16) in that mode. I think 12 pass is equivilent to best mode. What are you using the media profile for, photo or matte media, proofing or photographic output. I've found that the banding is more prevelant on the fine art papers. I forget where the gloss enhancer option is, i'm tired,  but i'm fairly certain I've run across it. I'll try and post it tomorrow.

Julian
Logged
Mussi_Spectraflow
Full Member
***
Offline Offline

Posts: 171


WWW
« Reply #2 on: February 20, 2007, 12:53:44 PM »
ReplyReply

Lara,

   Okay I found it. It's in the basic mode settings, after you name your mode click the "mode options" button under the dot pattern option. There is a check box that turns on gloss enhancer. You must have selected one of the photo options in the ink conifiguration or this will be grayed out. Hope that helps.

Julian Mussi
www.spectraflow.com
Logged

Julian Mussi

Spectraflow, Color Workflow Solutions
www.Spectraflow.com
fowvaydriver
Newbie
*
Offline Offline

Posts: 1


« Reply #3 on: February 27, 2007, 01:58:32 PM »
ReplyReply

I have been using Onyx Production House version 7.0.3. The driver is full of bugs period.
Bi-direction printing is not an issue as the other person stated when you pick the correct quality mode. Problems i have run into is the ink limiting for individual inks does not work as it should.
Forget turning on the clear option. Doesn't work. You will run into problems. I have spoken with there tech at lengh and they admit these two items are an issue along with a slew of other problems.. Version7.0.5 should be out any week now. Hopefully  it will be better than this buggy beta at best driver.
Come on Wasatch... where is your driver?
-jess


Quote
Is anyone using ONYX Production House as the Rip for the Z3100 printer?

I'm having issues with bi-directional banding (cannot turn bi-directional off)
and...
Gloss enhancer. Cannot access option to turn it on in ONYX.
[a href=\"index.php?act=findpost&pid=101691\"][{POST_SNAPBACK}][/a]
Logged
Mussi_Spectraflow
Full Member
***
Offline Offline

Posts: 171


WWW
« Reply #4 on: March 05, 2007, 11:57:20 AM »
ReplyReply

Quote
I have been using Onyx Production House version 7.0.3. The driver is full of bugs period.
Bi-direction printing is not an issue as the other person stated when you pick the correct quality mode. Problems i have run into is the ink limiting for individual inks does not work as it should.
Forget turning on the clear option. Doesn't work. You will run into problems. I have spoken with there tech at lengh and they admit these two items are an issue along with a slew of other problems.. Version7.0.5 should be out any week now. Hopefully  it will be better than this buggy beta at best driver.
Come on Wasatch... where is your driver?
-jess
[a href=\"index.php?act=findpost&pid=103545\"][{POST_SNAPBACK}][/a]
The new version will include a much better way to controll the ink limiting I am told. I'm waiting for the update before I do any more work with the Z3100.

Julian
Logged

Julian Mussi

Spectraflow, Color Workflow Solutions
www.Spectraflow.com
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad