Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Dynalite XP-1100 Battery Pack  (Read 4228 times)
jeff_singer
Jr. Member
**
Offline Offline

Posts: 53


WWW
« on: March 13, 2007, 07:48:15 PM »
ReplyReply

I have a lightly used Dynalite XP-1100 Battery Pack.  The unit is in perfect condition.

$950

http://www.dynalite.com/fxp1100_n.html

Dyna-Lite’s New XP1100 AC power supply will be the ONE OF THE MOST SOUGHT AFTER pieces of location lighting gear of the year. The XP1100 will provide dependable location power to your AC lighting gear, without the inconvenience of renting gas generators at every location along your route. The XP1100 is able to travel with you by air, unlike a gas generator with its restrictions. The XP1100 houses a matched battery, inverter and charger to produce ample AC power for your location assignments – using your existing AC lighting equipment. Why buy a battery powered set of lights when you already own a complete system of gear – no redundancy and incompatibility issues between two sets of lighting equipment. Just think of all the dollars saved!

The XP1100 contains an 1100-watt pure sine wave inverter that has the capacity to power up to any Dyna-Lite 1000 w.s. power pack for up to 200 full power flashes, while maintaining its fast 1.5 sec recycle time for at least 80% of the flashes. Unlike most battery portables, the XP1100 also allows you to use the modeling lamps when needed (of course, this reduces the number of flashes available). The quality of the XP1100’s output is safe enough to power delicate computer equipment.

Recharging the battery takes only 2 hours to reach 80% of its capacity and gets you back in business fast. The full charge will take 10 hours with a fully depleted battery. And if you don’t have time for a quick recharge, just drop in a spare interchangeable battery. The deep recycling battery is designed to withstand rugged use and provide hundreds of cycles of dependable service where ever you roam. All of this convenience is housed in a rugged 23 lb case that measures 6-3/4” X 6-3/4” X 12” (without handle). The XP1100 is made to be as versatile as any assignment you will run up against.
Logged

jeff singer | photography
http://jeffsingerphotography.com/blog
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad