Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: epson 4800 print problems  (Read 2136 times)
hippy Green
Newbie
*
Offline Offline

Posts: 24


« on: April 26, 2007, 10:55:00 PM »
ReplyReply

Hi there

I have epson 4800 which I have being getting some great print from but recently

I have been getting some problems of banding on solded areas of colour (pms colours) (see attached photos)

I have been printing from illustrator, indesign and Acrobat and still all getting the same problem.

It seem to be related to pms colours but all??? and not the photo

very strange

does any one have any ideas?

Cheers

Damian  
[attachment=2388:attachment]
[attachment=2389:attachment]
Logged
nikonjim
Newbie
*
Offline Offline

Posts: 8


WWW
« Reply #1 on: April 26, 2007, 11:07:31 PM »
ReplyReply

Quote
Hi there

I have epson 4800 which I have being getting some great print from but recently

I have been getting some problems of banding on solded areas of colour (pms colours) (see attached photos)

I have been printing from illustrator, indesign and Acrobat and still all getting the same problem.

It seem to be related to pms colours but all??? and not the photo

very strange

does any one have any ideas?

Cheers

Damian 

I have an epson 2200 and sometimes see the same thing. particularly when the printer hasn't been used for a while.  I find that I can usually get mine working properly by doing a print head cleaning, from the maintenance menu, printing a couple of photos and letting the thing "soak" overnight.  Ink seems to dry in the print head - a theory.  I think that there are more drastic ways to clean the print heads, but I haven't had to use those.
Logged
hippy Green
Newbie
*
Offline Offline

Posts: 24


« Reply #2 on: April 26, 2007, 11:15:28 PM »
ReplyReply

Quote
I have an epson 2200 and sometimes see the same thing. particularly when the printer hasn't been used for a while.  I find that I can usually get mine working properly by doing a print head cleaning, from the maintenance menu, printing a couple of photos and letting the thing "soak" overnight.  Ink seems to dry in the print head - a theory.  I think that there are more drastic ways to clean the print heads, but I haven't had to use those.
[a href=\"index.php?act=findpost&pid=114488\"][{POST_SNAPBACK}][/a]

the problems is that, it not over the whole sheet, just on very define areas ..... like an shape of an tree?? and the print has been use alot.... so don't think it is that

Doing head clean on epson 4800 iis very expensive to...... mmmm strange one???

thanks for your feed back

Cheers

Hack
Logged
Nill Toulme
Sr. Member
****
Offline Offline

Posts: 741



WWW
« Reply #3 on: April 27, 2007, 08:49:51 AM »
ReplyReply

Because each color has its own head, a clogged nozzle will produce banding or other untoward effects on particular areas of color.  I'm in the habit of always doing a nozzle check before starting a print job.  A regular nozzle clean (as distinguished from a "power clean") is not terribly expensive, and certainly less so than a large ruined print job (which I experienced yesterday when I broke my rule of always doing a nozzle check first).

Nill
~~
www.toulme.net
Logged
Lisa Nikodym
Sr. Member
****
Offline Offline

Posts: 1702



WWW
« Reply #4 on: April 27, 2007, 10:02:42 AM »
ReplyReply

I occasionally saw banding like that on prints from my 2200 as it got to be older (though never on only part of the print, but on the whole thing - but I suppose that could happen if only one ink color is bad).  I found that sometimes a nozzle clean wasn't enough, I had to go through the print head realignment maintenance routine.  At least start by doing a couple of nozzle cleans and one head realignment; there's a good chance that will fix your problem.

Lisa
Logged

Nill Toulme
Sr. Member
****
Offline Offline

Posts: 741



WWW
« Reply #5 on: April 27, 2007, 10:52:33 AM »
ReplyReply

Well the first step would be simply to print a nozzle check pattern.  That's easy and cheap and will confirm one way or the other whether it's clogged nozzles.  

Printing Preferences/Utility/Nozzle Check

A plain piece of paper will do... no need to waste a good sheet.  I actually reuse the same piece of plain paper four times, flipping it around and reloading it each time I do a nozzle check (which, absent the occasional regrettable mental lapse, is before each print job).

Nill
~~
www.toulme.net
Logged
Kirk Gittings
Sr. Member
****
Offline Offline

Posts: 1543


WWW
« Reply #6 on: April 27, 2007, 11:27:27 AM »
ReplyReply

I agree it is probably in need of just a good cleaning, but there has been the odd image for me that had fine banding with 4 Pass, but not with 8 Pass.
Logged

Thanks,
Kirk

Kirk Gittings
Architecture and Landscape Photography
WWW.GITTINGSPHOTO.COM

LIGHT+SPACE+STRUCTURE (blog)
Nill Toulme
Sr. Member
****
Offline Offline

Posts: 741



WWW
« Reply #7 on: April 27, 2007, 12:06:54 PM »
ReplyReply

What are 4 Pass & 8 Pass?  I'm not familiar with those terms.

Nill
~~
www.toulme.net
Logged
hippy Green
Newbie
*
Offline Offline

Posts: 24


« Reply #8 on: April 29, 2007, 03:51:40 PM »
ReplyReply

hay thanks guys, will try those option

thank you

Cheers

Damian
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad