Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: 1D Mark III problem  (Read 1880 times)
Wayne Fox
Sr. Member
****
Offline Offline

Posts: 2737



WWW
« on: October 09, 2007, 09:24:32 PM »
ReplyReply

I don't own a  1d mark III and I've never seen this in my 1Ds markII.  A friend of mine is having the problem and I'm clueless as to what is causing it unless its a CF card issue. I believe it's happened on multiple CF cards, but they be identical cards.

Every once and a while, only the top left part of the image is recorded, probably about 50% of the total image ,the rest of the image area is just white.  This is happening when he is working pretty slowly (fall leaves on tripod), not an issue of filling up a buffer, or card writing too slow.

 Any ideas?  I'll try to get a sample image to show what I'm talking about, but thought I'd ask in case someone recognizes the problem...
Logged

djgarcia
Sr. Member
****
Offline Offline

Posts: 343



WWW
« Reply #1 on: October 10, 2007, 02:35:08 PM »
ReplyReply

I had a shutter problem some time back with my 1DsII, where the top of the frame wasn't recording at the higher shutter speeds. Canon replaced the shutter. This almost sounds like the opposite, but maybe it's some shutter synchronization problem?
Logged

Over-Equipped Snapshooter - EOS 1dsII & 1DsIII, Zeiss & Leica lenses
http://improbablystructuredlayers.net
DiaAzul
Sr. Member
****
Offline Offline

Posts: 777



WWW
« Reply #2 on: October 10, 2007, 06:46:13 PM »
ReplyReply

I would suggest it is either (a) shutter problem - but if it is a corner not a horizontal line perhaps not or (b) light leakage ©internal circuit failure.

Probably best to get Canon to look at it - better safe than sorry.
« Last Edit: October 10, 2007, 06:46:37 PM by DiaAzul » Logged

David Plummer    http://photo.tanzo.org/
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad