Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Different monitor profiles for print vs. web?  (Read 2041 times)
Nill Toulme
Sr. Member
****
Offline Offline

Posts: 741



WWW
« on: September 16, 2008, 10:48:51 AM »
ReplyReply

We've had a lot of discussions here about appropriate luminance levels in monitor profiling/calibration.  I work in a fairly dim environment and have kept ratcheting down my NEC 2090uxi's luminance level to match my prints, to where I'm now at 85 cd/m and it's a pretty fair match.

Trouble is, now my web galleries are starting to look a little washed out.  It finally dawned on me that I should probably use different monitor profiles/calibrations for the two different purposes.  This notion was reinforced when I poked around in Spectraview II's supplied default calibration targets recently and noticed that the "Photo Editing" target is at 140 cd/m, while the "Print Standard" target is at 80.(!)

Happily, Spectraview II makes it extremely easy to save and recall multiple calibrations.

Do you any of you follow this approach, i.e., using different monitor calibrations for different purposes?  Comments, suggestions, recommendations?

Nill
Logged
Czornyj
Sr. Member
****
Offline Offline

Posts: 1423



WWW
« Reply #1 on: September 16, 2008, 12:30:01 PM »
ReplyReply

Quote
We've had a lot of discussions here about appropriate luminance levels in monitor profiling/calibration. I work in a fairly dim environment and have kept ratcheting down my NEC 2090uxi's luminance level to match my prints, to where I'm now at 85 cd/m and it's a pretty fair match.

Trouble is, now my web galleries are starting to look a little washed out. It finally dawned on me that I should probably use different monitor profiles/calibrations for the two different purposes. This notion was reinforced when I poked around in Spectraview II's supplied default calibration targets recently and noticed that the "Photo Editing" target is at 140 cd/m, while the "Print Standard" target is at 80.(!)

Happily, Spectraview II makes it extremely easy to save and recall multiple calibrations.

Do you any of you follow this approach, i.e., using different monitor calibrations for different purposes? Comments, suggestions, recommendations?

Nill
[a href=\"index.php?act=findpost&pid=221768\"][{POST_SNAPBACK}][/a]

I think it's a good idea to create a different calibration for web. Personally, I mainly work at 5800/1.8/80cd/m2 with "color comp" and "best grayscale tracking" option when I prepare my work for offset press, so everything really looks "wrong" in a web browser - the contrast is low, shadows are way too bright, and everythin looks warmer than on a regular monitor. That's why I have an "usual screen simulation" target with "maximize contrast ratio" priority, 6500/2.2/100.
« Last Edit: September 16, 2008, 02:09:21 PM by Czornyj » Logged

Nill Toulme
Sr. Member
****
Offline Offline

Posts: 741



WWW
« Reply #2 on: September 16, 2008, 12:35:23 PM »
ReplyReply

Coincidentally, that's exactly what I just set as my new standard for web processing.

Nill
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad