Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: 10D for nightscapes  (Read 1613 times)
andyfrazer
Newbie
*
Offline Offline

Posts: 29


« on: October 06, 2004, 06:37:42 PM »
ReplyReply

[font color=\'#000000\']I've been curious about this question for a while.  I've been using a D60 for the past two years almost exclusively for night photography.  I can give you an answer based on my experience with the D60, and from some postings on DPReview about the 10D.

The D60 maxes out after about 4 minutes.  At that time you may get a few hot pixels, but they can easily be removed in PhotoShop.  At 4-1/2 minutes, the image becomes unrecoverable.

From what I've heard of the 10D, some users say they start to see hot pixels after five minutes.  Others claim they go over 10 minutes without any hot pixels.  One user told me he got 18 minutes with no hot pixels, but when I looked at this image, they were definitely there, although it was comparable to my D60's five-minute exposures.

And the 20D is whole new bag of worms.  I haven't heard any long-exposure results with the 20D, yet.  If you hear of any, please let me know.[/font]
Logged
Ben Rubinstein
Sr. Member
****
Offline Offline

Posts: 1707


« Reply #1 on: September 26, 2004, 02:08:38 PM »
ReplyReply

[font color=\'#000000\']How is the 10D for night time shooting, nightscapes, etc. What shutter speed is the longest I can use at 100-200 iso to obtain good (I usually print at <16X12") results?[/font]
Logged

Christian
Jr. Member
**
Offline Offline

Posts: 70


« Reply #2 on: October 06, 2004, 08:52:46 PM »
ReplyReply

[font color=\'#000000\']I've done 5, 10 and 15 minute exposures with mine. The 10 seemed quite reasonable but by 15 there were obvious hot pixels. Nothing that couldn't be removed without too much effort though I would say.[/font]
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad