Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Does your NEC 3090 do this?  (Read 1923 times)
walter.sk
Sr. Member
****
Offline Offline

Posts: 1328


« on: January 29, 2009, 08:15:02 PM »
ReplyReply

I was gently wiping the screen (front, panel, or whatever it is called) on my NEC LCD3090WQXi when I noticed that the top edge seems not fastened to the inner edge of the bezel.  The sides and bottom appear to be firmly attached, but there is roughly a sixteenth of an inch play at the top.

Is this normal for this monitor?  I hate to sound paranoid about it, but on the other hand...
Logged
WillH
Full Member
***
Offline Offline

Posts: 138


WWW
« Reply #1 on: January 30, 2009, 12:52:02 AM »
ReplyReply

Quote from: walter.sk
I was gently wiping the screen (front, panel, or whatever it is called) on my NEC LCD3090WQXi when I noticed that the top edge seems not fastened to the inner edge of the bezel.  The sides and bottom appear to be firmly attached, but there is roughly a sixteenth of an inch play at the top.

Is this normal for this monitor?  I hate to sound paranoid about it, but on the other hand...

This is normal. The panel is not attached to the bezel at all points in order not to create any pressure points on the panel. The panel is extremely sensitive to pressure around the edges and this will show up as bleeding/light leakage.
Logged

Will Hollingworth
Senior Manager, Product Development
NEC Display Solutions of America, Inc.
walter.sk
Sr. Member
****
Offline Offline

Posts: 1328


« Reply #2 on: January 30, 2009, 08:55:49 AM »
ReplyReply

Quote from: WillH
This is normal. The panel is not attached to the bezel at all points in order not to create any pressure points on the panel. The panel is extremely sensitive to pressure around the edges and this will show up as bleeding/light leakage.
Whew!  Thanks for the reassuring response!
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad