Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: NEC 2690 ColorEyes  (Read 3085 times)
tived
Sr. Member
****
Offline Offline

Posts: 691


WWW
« on: May 10, 2009, 01:51:38 AM »
ReplyReply

Hi guys,

//venting on
currently here in AUstralia, 2nd grade country according to NEC, at least we are not entitled to purchase the software locally, unless we purchase their Spectraview line, over the Multiview line.
//venting off :-/

So, the question is, can ColorEyes replace the SpectraviewII or any other software for that matter?

thanks

Henrik
Logged
howardm
Sr. Member
****
Offline Offline

Posts: 785


« Reply #1 on: May 10, 2009, 07:07:56 AM »
ReplyReply

no way to 'import' it Huh  via re-shipping or a friend in the US?

I believe the NEC software is uniquely able to work w/ the internal display hardware.
Logged
Czornyj
Sr. Member
****
Offline Offline

Posts: 1422



WWW
« Reply #2 on: May 10, 2009, 08:36:35 AM »
ReplyReply

Quote from: tived
Hi guys,

//venting on
currently here in AUstralia, 2nd grade country according to NEC, at least we are not entitled to purchase the software locally, unless we purchase their Spectraview line, over the Multiview line.
//venting off :-/

So, the question is, can ColorEyes replace the SpectraviewII or any other software for that matter?

thanks

Henrik

No. There's a trick to activate Spectraview mode in Multisync 2690WUXi (swich the panel on with "INPUT" button pressed to activate the advanced menu, go to tag "E" and press "RIGHT" and "DOWN" buttons simultenously) , so you can calibrate it with Spectraview display 4 aka basICColor display 4, but it doesn't work with newer panels. The only solution to hardware calibrate any 2690WUXi is to get Spectraview II profiler that's available exclusively on North American market.
Logged

tived
Sr. Member
****
Offline Offline

Posts: 691


WWW
« Reply #3 on: May 10, 2009, 09:59:30 AM »
ReplyReply

Quote from: Czornyj
No. There's a trick to activate Spectraview mode in Multisync 2690WUXi (swich the panel on with "INPUT" button pressed to activate the advanced menu, go to tag "E" and press "RIGHT" and "DOWN" buttons simultenously) , so you can calibrate it with Spectraview display 4 aka basICColor display 4, but it doesn't work with newer panels. The only solution to hardware calibrate any 2690WUXi is to get Spectraview II profiler that's available exclusively on North American market.

thanks

i do have the newer version here, with a 2 in the end

hmm, i'll see if I can get my old brother to act as my middleman....ohh, that is going to cost me :-)

Henrik
Logged
msbc
Jr. Member
**
Offline Offline

Posts: 83


« Reply #4 on: May 10, 2009, 07:14:04 PM »
ReplyReply

Quote from: tived
thanks

i do have the newer version here, with a 2 in the end

hmm, i'll see if I can get my old brother to act as my middleman....ohh, that is going to cost me :-)

Henrik


I was lusting after the 2690 but went with a Dell 3008WFP for just this reason. The Spectraview models are ridiculously priced in Australia - over $3000 - and NEC Australia refuses to provide access to the software to calibrate the MultiSync version. I looked at importing the s/w from USA but read some posts on another forum that the local screens are also nobbled not to work with the USA Spectarview II s/w.
Logged
Josh-H
Sr. Member
****
Offline Offline

Posts: 1910



WWW
« Reply #5 on: May 10, 2009, 07:15:30 PM »
ReplyReply

Quote
et Spectraview II profiler that's available exclusively on North American market.

Now also available in Australia Imaging Science
« Last Edit: May 10, 2009, 07:17:45 PM by Josh-H » Logged

tived
Sr. Member
****
Offline Offline

Posts: 691


WWW
« Reply #6 on: May 10, 2009, 07:39:02 PM »
ReplyReply

Quote from: Josh-H
Now also available in Australia Imaging Science

HI Josh,

Nice website!

anyway ImageScience sells NEC's but they do not sell the software separately AFAIK, at least that is not what I understood when I last spoke to Jeremy, good bloke! though.

Henrik
Logged
Josh-H
Sr. Member
****
Offline Offline

Posts: 1910



WWW
« Reply #7 on: May 10, 2009, 11:43:49 PM »
ReplyReply

Quote from: tived
HI Josh,

Nice website!

anyway ImageScience sells NEC's but they do not sell the software separately AFAIK, at least that is not what I understood when I last spoke to Jeremy, good bloke! though.

Henrik

You are correct - you cant purchase the software separately in Australia - but you can order it from the USA if you have a USA shipping address you can send it to - which is what I did. It works out a lot cheaper to locally purchase a 2690 Wuxi and order the software from the US than it does to purchase a spectraview locally.
Logged

tived
Sr. Member
****
Offline Offline

Posts: 691


WWW
« Reply #8 on: May 11, 2009, 05:28:02 PM »
ReplyReply

Quote from: Josh-H
You are correct - you cant purchase the software separately in Australia - but you can order it from the USA if you have a USA shipping address you can send it to - which is what I did. It works out a lot cheaper to locally purchase a 2690 Wuxi and order the software from the US than it does to purchase a spectraview locally.

Well, it looks like that is the way it is going to be. Thanks everyone.

Henrik
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad