Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Manual instructions for a Briese 3200 Location generator  (Read 2363 times)
vertigoestudio
Newbie
*
Offline Offline

Posts: 13


WWW
« on: September 02, 2009, 09:33:58 AM »
ReplyReply

Hy everybody;
   
I bought this second hand generator, is quite old about 20 years.
It works perfectly connected to the electric network, but doesnīt charge the battery,
I think doing something wrong. Someone has used it, know how it works or have the manual?

This is the model.




Thank you very much.
Logged
UlfKrentz
Sr. Member
****
Offline Offline

Posts: 308


WWW
« Reply #1 on: January 07, 2010, 03:23:57 PM »
ReplyReply

Quote from: vertigoestudio
Hy everybody;
   
I bought this second hand generator, is quite old about 20 years.
It works perfectly connected to the electric network, but doesnīt charge the battery,
I think doing something wrong. Someone has used it, know how it works or have the manual?

This is the model.




Thank you very much.

Hi,

I suppose you might have found out meanwhile, if still needed try to get a manual at Briese www.briese-lichttechnik.de they should be able to provide a pdf or something similar. Itīs a simple workhorse pack which is not very complicated to use. Outlet 1 and 2 are symmetric, outlet 3 provides a fixed asymmetry (less power, shorter flash duration, faster recycling). Each dot for the power setting is a 1/4 stop, the red dots mark a full f-stop. You have On/Off, prop modeling light, cell and open flash, thatīs it.
As far as I know there is no battery to charge, this is a mains only unit though itīs called location.

Cheers, Ulf
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad