Ad
Ad
Ad
Pages: [1] 2 3 »   Bottom of Page
Print
Author Topic: Jenoptic M22 precision driver wanted  (Read 8894 times)
ixpressraf
Guest
« on: November 17, 2009, 12:19:26 PM »
ReplyReply

Hi all,
I have a Jenoptic Eyelike M22 but can't find the driver to connect the back to the mac. Help needed.
Thanks in advance.
Logged
ixpressraf
Guest
« Reply #1 on: November 17, 2009, 01:29:32 PM »
ReplyReply

I found a driver eyelike  capture pro 4,3,xxx but it asks me to insert the camera files CD wich is obviously missing when buing a secnd hand back. What to do now. ThierryH, maybe you can help.......
Logged
bdp
Full Member
***
Offline Offline

Posts: 235


WWW
« Reply #2 on: November 17, 2009, 01:38:02 PM »
ReplyReply

You need the CCD files that were on the original disk that came with the back. That disk should be part of any second hand sale as the back is useless without it. Can you contact the seller and get hold of it?

Otherwise MAYBE Jenoptik or Sinar has a library somewhere with all their old back's CCD files on it, or the back could be sent to them to have ones created, but either way I imagine they would charge you to do that.

Ben
Logged
Thomas Krüger
Sr. Member
****
Offline Offline

Posts: 450



WWW
« Reply #3 on: November 17, 2009, 01:55:25 PM »
ReplyReply

http://www.sinarcameras.com/de/downloads/c...like-capturepro
Logged
Imaginara
Full Member
***
Offline Offline

Posts: 114


« Reply #4 on: November 17, 2009, 02:51:20 PM »
ReplyReply

bdp is right. You need the calibration CD that should have been with the sale. The actual capture program (which Thomas linked to) will still require it.

Contact the original seller and if they dont have it (which is odd since its useless without them) try contacting Sinar as Bdp suggested.
Logged
ThierryH
Sr. Member
****
Offline Offline

Posts: 409


« Reply #5 on: November 17, 2009, 03:06:38 PM »
ReplyReply

I am not sure where from you bought this back. If from the Sinar dealer then he should have provided you these files, which are absolutely necessary. Other than that, you can contact Sinar directly: there effectively exists a library where all the ref files of the different back sold are stored, at Jenoptik (since it is a Jenoptik back). Sinar will certainly be able to get these files for you, but it is not a free service and costs about CHF 150,- to 200,-.

Best regards,
Thierry
« Last Edit: November 17, 2009, 03:07:23 PM by ThierryH » Logged

ixpressraf
Guest
« Reply #6 on: November 17, 2009, 03:36:19 PM »
ReplyReply

Thanks for the information. back comes from colleague who passed away a few months ago. His family can not locate the disk's anymore.
Logged
Kumar
Sr. Member
****
Offline Offline

Posts: 635


WWW
« Reply #7 on: November 17, 2009, 08:49:57 PM »
ReplyReply

Hi Raf,

A couple of years ago it cost me US$100 to get the CCD reference files (as a download) for an Eyelike M11.

Cheers,
Kumar
Logged

ixpressraf
Guest
« Reply #8 on: November 20, 2009, 08:59:34 AM »
ReplyReply

I eventually got hands to the original software CD with corrosponding CCD DATA file.... however: after installing the software i get a message of fire wire time out and i also can't select the H1 camera in the software. I then installed the newer version, 4.4xx but then even nothing happens. I am familiar with working with all phase and hassi/imacon back's, even the older leaf (upto the valeo) and older 6Mp sinar back's but this one really puzzles me. Why doesn't it work like just every other back i used. Please help wanted.
Greetz.
Logged
Steve Hendrix
Sr. Member
****
Offline Offline

Posts: 1032


WWW
« Reply #9 on: November 20, 2009, 09:49:24 AM »
ReplyReply

Quote from: ixpressraf
I eventually got hands to the original software CD with corrosponding CCD DATA file.... however: after installing the software i get a message of fire wire time out and i also can't select the H1 camera in the software. I then installed the newer version, 4.4xx but then even nothing happens. I am familiar with working with all phase and hassi/imacon back's, even the older leaf (upto the valeo) and older 6Mp sinar back's but this one really puzzles me. Why doesn't it work like just every other back i used. Please help wanted.
Greetz.


iXpressraf:

Version 4.4xx was specifically for eMotion backs, not the Precision series, which is what you have. You would need to use Capture Pro 4.3.5.3. But since the release date of Capture Pro 4.3.5.3 was October 2005, it is likely that it will not work well or possibly not at all on Intel systems, Leopard or later OS. What Mac and OS are you using?


Steve Hendrix
Logged

Steve Hendrix
Sales Manager, www.captureintegration.com (e-mail Me)
MFDB: Phase One/Leaf-Mamiya/Hasselblad/Leica/Sinar
TechCam: Alpa/Cambo/Arca Swiss/Sinar
Direct: 404.543.8475
Imaginara
Full Member
***
Offline Offline

Posts: 114


« Reply #10 on: November 20, 2009, 11:23:18 AM »
ReplyReply

Capture Pro 4.3.5.3 works fine on an intel macbook white with pre-snow leopard OSX at least. Have not installed Snow leopard so cant test that.
Logged
Steve Hendrix
Sr. Member
****
Offline Offline

Posts: 1032


WWW
« Reply #11 on: November 20, 2009, 11:35:58 AM »
ReplyReply

Quote from: Imaginara
Capture Pro 4.3.5.3 works fine on an intel macbook white with pre-snow leopard OSX at least. Have not installed Snow leopard so cant test that.


That's good to know, although I would caution that since 4.3.5.3 was not written for Intel or Leopard platforms, it may work fine on one computer, perhaps not on another.


Steve Hendrix
Logged

Steve Hendrix
Sales Manager, www.captureintegration.com (e-mail Me)
MFDB: Phase One/Leaf-Mamiya/Hasselblad/Leica/Sinar
TechCam: Alpa/Cambo/Arca Swiss/Sinar
Direct: 404.543.8475
Steve Hendrix
Sr. Member
****
Offline Offline

Posts: 1032


WWW
« Reply #12 on: November 20, 2009, 11:59:47 AM »
ReplyReply

Quote from: Steve Hendrix
That's good to know, although I would caution that since 4.3.5.3 was not written for Intel or Leopard platforms, it may work fine on one computer, perhaps not on another.


Steve Hendrix


I did just check in with one of my old Eyelike customers and he indicated no problems running on Intel either (Mac OS 10.5.Cool.

But in any case, iXpressraf, Capture Pro 4.4xxx is not for your back, you need 4.3.5.3.


Steve Hendrix
Logged

Steve Hendrix
Sales Manager, www.captureintegration.com (e-mail Me)
MFDB: Phase One/Leaf-Mamiya/Hasselblad/Leica/Sinar
TechCam: Alpa/Cambo/Arca Swiss/Sinar
Direct: 404.543.8475
ixpressraf
Guest
« Reply #13 on: November 20, 2009, 12:11:35 PM »
ReplyReply

OK. have installed 4.3.5.3 on a macbook G4 and now i get "the file eyelike precision can not openedbecause you don't have the acces permission -5000
End of story?Huh?
Then he asks me again to isert my name and phone number but after hitting the ok key: an error occured while reading the ccd file. the application could not work with the camera without the data in the file. But in the library under application support i have the eyelike precission m22 ccd and reference files.
Huh?
« Last Edit: November 20, 2009, 12:19:06 PM by ixpressraf » Logged
Steve Hendrix
Sr. Member
****
Offline Offline

Posts: 1032


WWW
« Reply #14 on: November 20, 2009, 12:17:18 PM »
ReplyReply

Quote from: ixpressraf
OK. have installed 4.3.5.3 on a macbook G4 and now i get "the file eyelike precision can not openedbecause you don't have the acces permission -5000
End of story?Huh?


PM'd.
Logged

Steve Hendrix
Sales Manager, www.captureintegration.com (e-mail Me)
MFDB: Phase One/Leaf-Mamiya/Hasselblad/Leica/Sinar
TechCam: Alpa/Cambo/Arca Swiss/Sinar
Direct: 404.543.8475
bdp
Full Member
***
Offline Offline

Posts: 235


WWW
« Reply #15 on: November 20, 2009, 03:09:24 PM »
ReplyReply

This is a permissions issue and can be fixed quite simply. I had this when I used a Precision back and installed it on a new Mac, but I can't remember how I fixed it. Check your permissions by using command-I when Eyelike Capture Pro is highlighted in your applications folder. Something needs to be ticked or unticked or something like that.
« Last Edit: November 20, 2009, 03:10:26 PM by bdp » Logged
ixpressraf
Guest
« Reply #16 on: November 20, 2009, 03:24:20 PM »
ReplyReply

Was one of the first things i tried but: nope.......
I wonder if all sinar eyelike back's are that difficult to install....
Logged
ThierryH
Sr. Member
****
Offline Offline

Posts: 409


« Reply #17 on: November 20, 2009, 03:35:30 PM »
ReplyReply

Quote from: ixpressraf
Was one of the first things i tried but: nope.......
I wonder if all sinar eyelike back's are that difficult to install....

I am not sure, but may be try to "Repair Permissions".

I never had any problem to install and to get it working.

Best regards,
Thierry
Logged

yaya
Sr. Member
****
Offline Offline

Posts: 1113



WWW
« Reply #18 on: November 20, 2009, 03:35:54 PM »
ReplyReply

Quote from: ixpressraf
Was one of the first things i tried but: nope.......
I wonder if all sinar eyelike back's are that difficult to install....

-5000 error is normally relates to DVD reader operation. Perhaps the software is looking for the CCD files on a disc?

If you have them, try burning them on a disc and running the software, maybe it will then find them and put put them wherever they need to be and create the right path for suing them with the back?

Just guessing but worth a try maybe.

yair
Logged

Yair Shahar | Product Manager | Mamiya Leaf |
e: ysh@leaf-photography.com | m: +44(0)77 8992 8199 | www.mamiyaleaf.com | yaya's blog
ThierryH
Sr. Member
****
Offline Offline

Posts: 409


« Reply #19 on: November 20, 2009, 03:41:33 PM »
ReplyReply

Quote from: yaya
-5000 error is normally relates to DVD reader operation. Perhaps the software is looking for the CCD files on a disc?

If you have them, try burning them on a disc and running the software, maybe it will then find them and put put them wherever they need to be and create the right path for suing them with the back?

Just guessing but worth a try maybe.

yair

That could be the reason.

Since you have the files on the original CD try to simply copy them where they should be on your HD: Library ---> Application Support ---> Eyelike (here there should be a folder for the ref files, but I can't remember the name, drop them in).

Best regards,
Thierry
Logged

Pages: [1] 2 3 »   Top of Page
Print
Jump to:  

Ad
Ad
Ad