Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: developing color negs and/or transparancies at home  (Read 3896 times)
harlemshooter
Guest
« on: December 07, 2009, 07:06:00 PM »
ReplyReply

how many do this?  are there any good tutorials on setting up one's own "lab?"  i read on largeformatphotography that sensitization is a big problem.
Logged
DanielStone
Sr. Member
****
Offline Offline

Posts: 559


« Reply #1 on: December 07, 2009, 10:33:58 PM »
ReplyReply

howdy!

you might want to waddle over to www.apug.org

its a film-discussion only forum. no digi talk. I'm over there, and frequent it quite regularly.

I don't want this to go stale, and I'd like to see you get the info you need. Go to APUG. you'll get the answers in no time flat.

blessings,

Dan
Logged
Greg Campbell
Newbie
*
Offline Offline

Posts: 42



« Reply #2 on: January 15, 2010, 10:22:47 AM »
ReplyReply

Quote from: harlemshooter
how many do this?  are there any good tutorials on setting up one's own "lab?"  i read on largeformatphotography that sensitization is a big problem.

I'm doing 220 and 35mm E-6 using daylight roll tanks.  The Kodak "5 liter" kit produces great results, at significantly less expense than commercial labs.
You don't really need a 'lab,' just a bunch of beakers and a large tray full of moving, temperature controlled water.  You can go with a dedicated, electronically controlled thermostat driven system, or kludge together something using a fountain pump, manually adding hot water to the bath as necessary.    

As suggested, APUG will deliver plenty of specific advice (and opinions!).    

Logged
k bennett
Sr. Member
****
Offline Offline

Posts: 1458


WWW
« Reply #3 on: January 15, 2010, 11:55:22 AM »
ReplyReply

In my experience, color neg is fairly straightforward. You need a water bath approximating 100-F, and the right chemistry, otherwise it's no different than b+w neg. (My experience was about 10,000 rolls of color neg developed in small tanks in nine years as an AP stringer. I could soup film while half drunk and three quarters asleep.) I did try slide film once or twice, but of course it's a little more particular about the details like exact times and temps.
Logged

Equipment: a camera and some lenses.
cyberean
Full Member
***
Offline Offline

Posts: 161


WWW
« Reply #4 on: January 15, 2010, 04:33:16 PM »
ReplyReply

Quote from: k bennett
I could soup film while half drunk and three quarters asleep.) I did try slide film once or twice, but of course it's a little more particular about the details like exact times and temps.
the trick with slide film is being only a quarter drunk and no more than a third asleep ...
Logged

check out the size of my sensor ...
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad