Ad
Ad
Ad
Luminous Landscape Forum > Raw & Post Processing, Printing > Other Raw Converters > Is DPP 3.9 imminent?
Pages: [1]   Bottom of Page
Print
Author Topic: Is DPP 3.9 imminent?  (Read 2735 times)
NigelC
Sr. Member
****
Offline Offline

Posts: 495
« on: September 25, 2010, 07:29:04 AM »
 ReplyReply
Apparently, there is an online manual available for 3.9, but Canon UK software downloads only have 3.8.2
Logged
elied
Full Member
***
Offline Offline

Posts: 171
« Reply #1 on: September 27, 2010, 05:21:34 AM »
 ReplyReply
In the past the practice has been for Canon to put up the the download about a month after the cameras have shipped and are in the stores. 60D is arriving now.
Logged
Pytlowany
Newbie
*
Offline Offline

Posts: 4
« Reply #2 on: October 28, 2010, 07:34:07 PM »
 ReplyReply
Just downloaded DPP v3.9.2 from Canon Europe.  http://software.canon-europe.com/products/0010800.asp  The obvious additions that I've seen are: Now has X Key Rating for Rejects, 5 Check Mark Ratings vs. 3, 5 Star Ratings, Unsharp Mask, new lens & tele converter corrections & maybe other stuff that I haven't seen yet.
Logged
Philnick
Newbie
*
Offline Offline

Posts: 9
« Reply #3 on: October 29, 2010, 05:57:12 PM »
 ReplyReply
3.9 supports the G12. The disk in the G12 box contains DPP 3.9.1, but no DPP manual - which I had to search for online. In the course of that search I also found the 3.9.2 update on the European Canon website, which I did right away.

Not sure what the differences are between 3.9.1 and 3.9.2, since I did the online upgrade within a day!

Ironically, DPP provides better support for the G12 than it does for my XTi, since the XTi doesn't record shooting distance, so the Lens aberration correction screen comes up with the shooting distance slider for the XTi at infinity, with a "<!>" notation meaning - I assume - "I have no idea what the shooting distance was."

It would be nice, however, if that slider gave you some indication what distance you are setting it to when you slide it!
« Last Edit: October 29, 2010, 06:05:27 PM by Philnick » Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad