Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Projector  (Read 110692 times)
Woodcorner
Full Member
***
Offline Offline

Posts: 102


« on: September 30, 2010, 10:22:45 AM »
ReplyReply

Hi All,

What projectors are currently state-of-the-art when it comes to showing photographs?

I am looking for a projector with HD resolution (such as 1,920 x 1,200 pixels),  that can be calibrated/profiled and shows excellent colors and contrast in a medium dark to dark environment. Image dimension should be up to 23 feet or 7 meters.

Any thoughts on this when price is not the foremost issue?

Thx,
Andrew
Logged
AJSJones
Sr. Member
****
Offline Offline

Posts: 356



« Reply #1 on: October 17, 2010, 05:40:39 PM »
ReplyReply

Here is an example  - a BenQ - with 4500 lumens for $4K (I don't even know if that's enough for a 23 ft screen - the specs say it will project an image from 28-500 inches!) That site has lots of information.  It has analog VGA input as well as HDMI (which means a computer with DVI out can drive it with an adapter)  Don't know if it can be calibrated but there are photometers for front projectors.  Don't know about the gamut (it's a business projector).  Should be a good starting place...
Logged
feppe
Sr. Member
****
Offline Offline

Posts: 2909

Oh this shows up in here!


WWW
« Reply #2 on: October 17, 2010, 06:42:41 PM »
ReplyReply

Here is an example  - a BenQ - with 4500 lumens for $4K (I don't even know if that's enough for a 23 ft screen - the specs say it will project an image from 28-500 inches!) That site has lots of information.  It has analog VGA input as well as HDMI (which means a computer with DVI out can drive it with an adapter)  Don't know if it can be calibrated but there are photometers for front projectors.  Don't know about the gamut (it's a business projector).  Should be a good starting place...

My projector experience is limited to home theater use.

According to this calculator 4500 lumens is enough for a 5 meter screen, although I'm skeptical - for a 7 meter screen I'd go quite a bit brighter. It's hard to have too much light power in a projector when there's ambient light. Note that projection screen material and its color can make a significant impact on perceived brightness. (edit: according to this even a 6500 lumen projector doesn't have enough brightness for a 7-meter screen.)

All modern projectors can be calibrated to a certain extent using appropriate hardware monitor or dedicated calibrators, but you have a pretty steep learning curve to do it by yourself. I'm not aware of semi-automatic calibration software like we have for monitor calibration, so you'll have to do it manually. Thankfully it creates much better results as you are able to tweak the areas of gamut/luminance/brightness/etc you prefer within delta-e parameters you decide, rather than one-size-fits-all approach the monitor calibration softwares I've used.

Rather than business projectors I'd go for a proper 1080p home theater projector as they generally have better options for calibration, especially at the price range you are required to go due to lumen and screen size requirements. Note that you require quite a bit of throw distance to get a 7 meter screen, and this varies wildly among projectors. Also, projectors that bright will make a lot of noise and heat, so you might need an enclosure or separate projection room depending on the venue. Best site for reviews is Project Central, and they have several calculators as well.
« Last Edit: October 17, 2010, 06:47:54 PM by feppe » Logged

AJSJones
Sr. Member
****
Offline Offline

Posts: 356



« Reply #3 on: October 18, 2010, 01:18:40 PM »
ReplyReply

Yeah, I gulped when I saw the 23 foot screen requirement - my 9 ft (diagonal) screen is driven by 700 lumens in a dark cave, so 4500 seemed like a lot.  The lumen requirement will depend somewhat on the extent of room darkening, and then there's the screen gain, audience viewing angle etc.  to consider - it's quite a project to undertake!
Logged
digitaldog
Sr. Member
****
Offline Offline

Posts: 9317



WWW
« Reply #4 on: October 18, 2010, 03:24:45 PM »
ReplyReply

Lumens isn’t really a very good spec for projectors if you are interested in anything OTHER than black text on a white bkgnd! Certainly no indication of image quality. DLP’s have an extra white filter to up the Lumens spec which actually hurts image quality. See: http://www.lumita.com/news/latest/new-color-light-output-metric-gains-traction-at-infocomm-2008-and-projection-summit/

If image quality is important, you’ll actually want to avoid DLP’s and certainly not use Lumens to compare to LCD’s with the idea that more is better. Its not.
Logged

Andrew Rodney
Author “Color Management for Photographers”
http://digitaldog.net/
AJSJones
Sr. Member
****
Offline Offline

Posts: 356



« Reply #5 on: October 18, 2010, 03:29:42 PM »
ReplyReply

Well, of course, I meant "good" lumens Cheesy
Logged
feppe
Sr. Member
****
Offline Offline

Posts: 2909

Oh this shows up in here!


WWW
« Reply #6 on: October 18, 2010, 03:41:53 PM »
ReplyReply

Lumens isn’t really a very good spec for projectors if you are interested in anything OTHER than black text on a white bkgnd! Certainly no indication of image quality. DLP’s have an extra white filter to up the Lumens spec which actually hurts image quality. See: http://www.lumita.com/news/latest/new-color-light-output-metric-gains-traction-at-infocomm-2008-and-projection-summit/

If image quality is important, you’ll actually want to avoid DLP’s and certainly not use Lumens to compare to LCD’s with the idea that more is better. Its not.

I'd say lumens are more important in this case than anything else. A 7-meter screen is very large, and there's absolutely no point in using a ~2,000 lumen HT projector: no matter how great the image quality of the latest 1080p generation is, it's going to be entirely washed out at such size at that spec. I'd rather have a bright picture with color casts than a washed out one with perfect calibration (if it even can be achieved). Of course throwing money at the problem should fix the issue.

Having said that, differences in lumen specs and measurements are quite big, so 1 lumen from one manufacturer or tech (LCD, DLP) is not equal, so one has to do research where lumens matter.

Besides, LCD (HT) projectors have all kinds of magic features in them which are just as dubious as some DLP features, such as auto-iris (lol really?) or eco modes, or the lower-powered Cinema mode supposedly best for... cinema on my Panasonic which has horrendous color casts and calibrates much worse than the full-power mode.
Logged

digitaldog
Sr. Member
****
Offline Offline

Posts: 9317



WWW
« Reply #7 on: October 18, 2010, 05:59:45 PM »
ReplyReply

I'd rather have a bright picture with color casts than a washed out one with perfect calibration (if it even can be achieved).

With the higher spec that appears good on a DLP, washed out is what you’ll get. Think if painting your color images with more pure white, solely to up the lumens marketing spec.

I’m not saying disregard lumens. I’m saying its not a fair spec when one technology ups the value by throwing more white onto your images. I’m also saying, probably avoid DLPs. I’m also saying, there is a better spec out there (see the link below and http://www.lumita.com/site_media/work/whitepapers/files/NISTIR-6657_Projector_RGB-Flux.pdf), we just need industry adoption.
Logged

Andrew Rodney
Author “Color Management for Photographers”
http://digitaldog.net/
feppe
Sr. Member
****
Offline Offline

Posts: 2909

Oh this shows up in here!


WWW
« Reply #8 on: October 18, 2010, 06:01:52 PM »
ReplyReply

I’m also saying, there is a better spec out there (see the link below and http://www.lumita.com/site_media/work/whitepapers/files/NISTIR-6657_Projector_RGB-Flux.pdf), we just need industry adoption.

I think there's about as much chance of that happening as a standardized approach to DR measurements of digital cameras accepted by everyone Tongue
Logged

Woodcorner
Full Member
***
Offline Offline

Posts: 102


« Reply #9 on: October 18, 2010, 11:49:37 PM »
ReplyReply

Hi guys,

Thanks to everyone for sharing their thoughts and valuable links. It appears that there is no easy solution as of now, and maybe the initial assumptions were 'too fuzzy' for a precise answer. For this, let me try to refine the specifications:

1. The projector is intended to be used for the public presentation of photographs with the highest quality (in regards to color, contrast, sharpness) possible.
2. The room will be almost dark with no natural light and very dim (if any) artificial light.
3. The projection screen width will be varying anywhere between 2 meters (6.5 feet) and 7 meters (23 feet). Most of the time (95%), the screen width will be between 3 and 5 meters (10 to 16 feet). We're using Stumpfl Monoblox projection screens with Flex White CI screen material (gain factor 1.02, viewing angle: +/- 50°).

We've looked at various solutions such as Canon's REALIS WUX10 (LCOS), Leica Pradovit D-1200 (DLP), or JVC DLA-X3/X7 (D-ILA) projectors, but would appreciate some insight from experienced users.

Thanks,
Andrew
Logged
AJSJones
Sr. Member
****
Offline Offline

Posts: 356



« Reply #10 on: January 28, 2011, 07:15:31 PM »
ReplyReply

Andrew, There are subforums devoted to projectors and screens at AVSForums .  They will surely be able to help with those specific requirements!

Andrew
Logged
feppe
Sr. Member
****
Offline Offline

Posts: 2909

Oh this shows up in here!


WWW
« Reply #11 on: January 28, 2011, 08:27:46 PM »
ReplyReply

Andrew has probably moved on, last post is over three months old...
Logged

Farmer
Sr. Member
****
Offline Offline

Posts: 1631


WWW
« Reply #12 on: January 28, 2011, 10:53:24 PM »
ReplyReply

http://epson.com.au/products/projector/EB-Z8000WU.asp
Logged

Woodcorner
Full Member
***
Offline Offline

Posts: 102


« Reply #13 on: January 29, 2011, 02:09:24 AM »
ReplyReply

Thanks for your suggestions - and no, I haven't moved on...  Smiley

Cheers,
Andrew
Logged
Graham Clark
Full Member
***
Offline Offline

Posts: 169



WWW
« Reply #14 on: February 25, 2013, 03:20:43 PM »
ReplyReply

I highly recommend the Epson 8350. Excellent resolution and lumen count for $1300USD.

http://www.bestbuy.com/site/Epson---PowerLite-Home-Cinema-8350-Projector/1372995.p?id=1218254499896&skuId=1372995
Logged

Graham Clark  |  grahamclarkphoto.com
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad