Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Upgrading to CS5 and Mac 10.6 (Snow Leopard)  (Read 1648 times)
bellimages
Sr. Member
****
Offline Offline

Posts: 317


WWW
« on: February 22, 2011, 10:49:25 PM »
ReplyReply

I am currently using OS 10.5 (Leopard) with Photoshop CS4. Things are running smoothly and printing is smooth to my Epson 7900. I make use of Epson's Advanced Black and White print panel for most of my printing, since I shoot mainly B&W.

Will the Epson Advanced Black and White print panel still be available to me once I upgrade to Snow Leopard (OS 10.6) and Photoshop CS5? I have two shows coming up and I have to print a lot of images. I can't afford to deal with problems.


Jan Bell
www.bellimages.com
Logged

Jan Bell, Owner/Photographer, Bell Images
www.bellimages.com

"Making the simple complicated is commonplace, Making the complicated simple, awesomely simple, that's creativity."    Charles Mingus
Conner999
Sr. Member
****
Offline Offline

Posts: 466


« Reply #1 on: February 24, 2011, 07:24:03 AM »
ReplyReply

Under the theories of 'what can go wrong will go wrong' and a reluctance I have to messing with a well-running printing process (its always a PITA) is to create a temporary dual-boot system. I'm using the approach now due to an upcoming shoot I'll need to produce some prints from (upgrading from CS3 and Tiger).

You keep your existing system as is, but install Snow Leopard to a clean and formatted fast external drive (or internal one if a Mac Pro). Copy over any existing apps you need and then download the free trial version of CS5 to the new drive.  

This way on a re-start you can boot to SL or your older system at will - and access any files back and forth. This allows you to try CS5 for processing & printing, etc w/o risking throwing an 11th hr monkey wrench into your existing printing process.  

You can also process images in CS5, save them as TIFFs and the re-boot in the older system and print from your existing printing pipeline and older copy of PS.  

The approach also allows you test-drive any apps you have or are thinking of getting (via trial versions) for  issues with SL, etc - with zero risk.  When all said and done and happy - you can make the move permanent, upgrade to a paid copy of CS5 and away you go (I'm actually keeping a bootable copy of my older system with apps - just in case).  

I liked the setup so much (still very fast even over FW), that to make it simpler, I did a couple of updated clones of my existing Tiger  (I know.. ouch) system drive (just in case) then re-partioned the drive with a a 10.6.6 startup 'disk', an older 10.4._ startup 'disk', and a third for shared files I might be working on at the moment. This allows me a simpler backup process as only have one physical (w/ 3 partitions) system/apps drive (vs image drives) to clone during regular backups.

Oddly enough, the setup felt a smidgen faster over FW vs. my internal system, despite its faster access speeds as the internal drive is a lower-capacity, slow 5400rpm unit with a small cache vs. the 1Tb 7200 rpm, 32mb cache unit I had running it via firewire. That said, it will easily do until I move to a Mac Pro later this winter. Still feels like a MUCH, MUCH improved machine. I am actually gobsmacked by how much better (speed, memory allocation, etc) 10.6.6. is, even running a hog like CS5, over the last version of Tiger running CS3. That and fact, so far, NO issues.

That said, I have not tried printing with CS5 yet so haven't set-up Epson drivers under SL as simply too busy prepping for shoot to go down what could be a long series of troubleshooting days. I'll save that for when I'm in the right mood.
« Last Edit: February 24, 2011, 09:04:26 AM by Conner999 » Logged
tcphoto1
Newbie
*
Offline Offline

Posts: 22


WWW
« Reply #2 on: February 24, 2011, 08:37:52 AM »
ReplyReply

I have read that Apple has just today send their first OS10.7(Lion) to Developers and Adobe will release CS6 this summer. Would it be easier to simply keep your system as it is and wait for the next generation of both?
Logged
langier
Sr. Member
****
Offline Offline

Posts: 657



WWW
« Reply #3 on: February 24, 2011, 09:06:07 AM »
ReplyReply

I'm running 10.6.5 and CS5 successfully on my MacPro quad-core. The system is stable and my Epsons are running and printing fine from this configuration.

I'm printing fine to both my Epson 4000 (antique!) via USB and also on my Epson 9900 via Ethernet.

Yes, the Epson Advance Black and White panel is there, but I do my b&w work in CS5 so I have the option of running my files on any of my printers, web or print publication.

I keep getting the alerts for 10.6.6 but since I'm in the middle of two large printing projects, I'm holding off until they are done, just in case!

At the start, I had glitches using the E4000. However, since I got the E9900 and installed all new drivers, both printers are working fine. I also have an Epson 9800 and run it with my G5 but haven't taken the time to get it going with the MacPro since I got it mainly to run the E9900.
Logged

Larry Angier
ASMP, NAPP, ACT, and many more!

Webmaster, RANGE magazine
Editor emeritus, NorCal Quarterly

web--http://www.angier-fox.photoshelter.com
facebook--larry.angier
twitter--#larryangier
google+LarryAngier
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad