Ad
Ad
Ad
Pages: [1] 2 »   Bottom of Page
Print
Author Topic: Information Alpa Switzerland & Thierry Hagenauer  (Read 3676 times)
TH_Alpa
Full Member
***
Offline Offline

Posts: 214



« on: June 27, 2011, 12:12:25 AM »
ReplyReply

Dear All,

I would like to inform you that I will be again active on this forum and some others from now on, officially for the Alpa brand of cameras and accessories based in Zürich, Switzerland.

Thomas Weber from Alpa and his wife Ursula got in touch with me a few months ago, and we met then in Zürich where Thomas asked me if I would accept to be their ambassador on the forums. I felt very honored by this proposal, and obviously accepted to speak about such a mythic brand and such wonderfully built technical cameras, lenses and accessories.

You may understand that I won’t give anymore any information or advice concerning Sinar products.

I would like also to point out that I do not have any special agenda on this discussion forum but to try to speak honestly about the products I am now representing and using, without deforming or giving wrong information. It is not at all my intention to denigrate or speak down in any way other brands represented here.

Also, this is not my main occupation. Therefore don’t expect to get always an immediate answer or reaction.

I do not pretend to know all about Alpa, at this stage, and therefore would like to seek for understanding and patience if sometimes I need to get the information directly from my Alpa colleagues or elsewhere.

For those of you whishing to contact me directly, I am open to answer any direct email at my contact below.

Those who wish to have more information about my motivations to represent and speak about Alpa Switzerland can read it under following link:

http://tinyurl.com/6433oaf
 
All the best to all,

Thierry Hagenauer

Alpa Consultant
Neuhausen am Rheinfall

email: thierry.hagenauer@shinternet.ch

www.alpa.ch
Logged

Graham Mitchell
Sr. Member
****
Offline Offline

Posts: 2282



WWW
« Reply #1 on: June 27, 2011, 12:16:33 AM »
ReplyReply

Welcome back, Thierry!
Logged

Graham Mitchell - www.graham-mitchell.com
wolfnowl
Sr. Member
****
Offline Offline

Posts: 5698



WWW
« Reply #2 on: June 27, 2011, 12:46:40 AM »
ReplyReply

And congratulations!

Mike.
Logged

If your mind is attuned to beauty, you find beauty in everything.
~ Jean Cooke ~


My Flickr site / Random Thoughts and Other Meanderings at M&M's Musings
PdF
Sr. Member
****
Offline Offline

Posts: 291



« Reply #3 on: June 27, 2011, 01:10:58 AM »
ReplyReply

Bienvenue au bercail.

PdF
Logged

PdF
EricWHiss
Sr. Member
****
Offline Offline

Posts: 2370



WWW
« Reply #4 on: June 27, 2011, 02:02:16 AM »
ReplyReply

Nice to hear from you and welcome back! 
Logged

Authorized Rolleiflex Dealer:
Find product information, download user manuals, or purchase online - Rolleiflex USA
BartvanderWolf
Sr. Member
****
Offline Offline

Posts: 3413


« Reply #5 on: June 27, 2011, 02:32:09 AM »
ReplyReply

Dear All,

I would like to inform you that I will be again active on this forum and some others from now on, officially for the Alpa brand of cameras and accessories based in Zürich, Switzerland.

Hi Thierry,

Congratulations, to you and Alpa!

Alpa have selected a super ambassador, befitting the quality of their equipment.

Cheers,
Bart
Logged
eronald
Sr. Member
****
Offline Offline

Posts: 3856



WWW
« Reply #6 on: June 27, 2011, 02:42:28 AM »
ReplyReply

Here comes Thierry and stoppeth one in three Smiley

I think you still owe me a beer though.

Welcome back.

Edmund


Hi Thierry,

Congratulations, to you and Alpa!

Alpa have selected a super ambassador, befitting the quality of their equipment.

Cheers,
Bart
Logged

Edmund Ronald, Ph.D. 
MHFA
Jr. Member
**
Offline Offline

Posts: 77


« Reply #7 on: June 27, 2011, 02:55:35 AM »
ReplyReply

Ambassador on the web...

Congratulations Mr. Weber, ALPA seems to be the only who is listening to Photographers and their needs.
Arca, Linhof and Sinar have also great products, but don`t compare customer care.

Michael H.
Logged
Mr. Rib
Sr. Member
****
Offline Offline

Posts: 831


« Reply #8 on: June 27, 2011, 02:56:46 AM »
ReplyReply

Welcome back Thierry
Logged
design_freak
Sr. Member
****
Offline Offline

Posts: 1074



« Reply #9 on: June 27, 2011, 03:15:42 AM »
ReplyReply

Welcome
Logged

Best regards,
DF

-------------------------------------------
WORK HARD AND BE NICE TO PEOPLE
-------------------------------------------
Anders_HK
Sr. Member
****
Offline Offline

Posts: 1001



WWW
« Reply #10 on: June 27, 2011, 03:45:31 AM »
ReplyReply

Very good news!!! Smart choice of Alpa  Grin

Welcome back!  Smiley

Regards
Anders
Logged
erickb
Full Member
***
Offline Offline

Posts: 235


WWW
« Reply #11 on: June 27, 2011, 07:35:37 AM »
ReplyReply

on va enfin avoir des infos :-)
Logged
DanLindberg
Newbie
*
Offline Offline

Posts: 20


WWW
« Reply #12 on: June 27, 2011, 02:01:04 PM »
ReplyReply

Great! I start imediately with a question I have thought about  Grin  Cheesy  Cool

Is it possible to see through the Alpa viewfinder 'how much' rise you need for any particular architectual shot where you need to apply rise/fall?
Logged

Alpa FPS & MAX & SWA & TC | SK 28XL | SK 35XL | SK 72L | SK 90N | SK 120N | Leaf Aptus II 5 & Leaf CREDO 60
http://www.danlindberg.com
https://www.facebook.com/danlindbergphotography
rethmeier
Sr. Member
****
Offline Offline

Posts: 773


WWW
« Reply #13 on: June 27, 2011, 08:54:10 PM »
ReplyReply

Hi Thierry,
good to hear you're still in the business.
Alpa is a great product.
Warm regards,
Willem.
Logged

Willem Rethmeier
www.willemrethmeier.com
Sydney Australia
ced
Sr. Member
****
Offline Offline

Posts: 263


« Reply #14 on: June 28, 2011, 03:56:52 AM »
ReplyReply

Hi Thierry!  Good to hear you are involved again and in a fine product too!  Good luck and go for it.
Logged
TH_Alpa
Full Member
***
Offline Offline

Posts: 214



« Reply #15 on: June 28, 2011, 12:23:14 PM »
ReplyReply

To all: thanks for your encouraging words, it's much appreciated.

@ andalucia: yes, there is such a help by using the Alpa viewfinder shift mask. Have a look here:

http://www.alpa.ch/en/products/framing-focussing/viewfinder/alpa-viewfinder-masks-2.html

It's a special made mask with shift marks. However, parallax error has to be taken in count, therefore the indications are an approximation. This mask exists for different formats and focal lengths.

Best regards
Thierry
Logged

Wim van Velzen
Sr. Member
****
Offline Offline

Posts: 354



WWW
« Reply #16 on: June 28, 2011, 12:40:46 PM »
ReplyReply

Good to see you back and that at such a wonderful place to work! Congrats.
Logged

I don't have a signature.
DanLindberg
Newbie
*
Offline Offline

Posts: 20


WWW
« Reply #17 on: July 03, 2011, 10:20:59 AM »
ReplyReply

Thanks Thierry for your reply!

This is probably not the right thread to ask questions....but then again....why not  Wink

As I understand, the STC is natively made for shifting left/right. Obviously one can turn it 90 degrees and get rise/fall, but my question is if I all four sides of the body will take on the grip and viewfinder? I would prefer to have rise/fall as my default position. I cannot see by the pictures if this is possible!
Logged

Alpa FPS & MAX & SWA & TC | SK 28XL | SK 35XL | SK 72L | SK 90N | SK 120N | Leaf Aptus II 5 & Leaf CREDO 60
http://www.danlindberg.com
https://www.facebook.com/danlindbergphotography
TH_Alpa
Full Member
***
Offline Offline

Posts: 214



« Reply #18 on: July 03, 2011, 12:37:27 PM »
ReplyReply

Dear andalucia,

For the clarity and rightness of the forum I shall open a new thread to answer your question.

Thierry


This is probably not the right thread to ask questions....but then again....why not  Wink

Logged

ynp
Full Member
***
Offline Offline

Posts: 241


WWW
« Reply #19 on: July 05, 2011, 08:34:28 AM »
ReplyReply

Welcome back, Thierry!
Logged
Pages: [1] 2 »   Top of Page
Print
Jump to:  

Ad
Ad
Ad