Ad
Ad
Ad
Pages: « 1 ... 62 63 [64] 65 66 ... 73 »   Bottom of Page
Print
Author Topic: Epson 7900 from the inside - out  (Read 306414 times)
astam
Newbie
*
Offline Offline

Posts: 2


« Reply #1260 on: February 12, 2013, 07:30:20 PM »
ReplyReply

Wow...what a great webpage.  No.  Really.  Eric, if we ever have the opportunity to meet, the first (name a small to large number) are on me.

My clogged 4900 (and I) thank you.

Allan
Logged
davidh202
Sr. Member
****
Offline Offline

Posts: 546


« Reply #1261 on: February 12, 2013, 07:41:36 PM »
ReplyReply

Eric,
I am very curious as to how you are dealing with the touchy subject of the proprietary software necessary to do the installation of a new head?
do you expect repercussions from the "parent company" since other sites have pulled all their info off their site due to worries about copyright infringement? Site looks fantastic! Luv the machines clogs.
 David
« Last Edit: February 12, 2013, 08:06:33 PM by davidh202 » Logged
Eric Gulbransen
Sr. Member
****
Offline Offline

Posts: 298


never surrender


WWW
« Reply #1262 on: February 12, 2013, 08:16:11 PM »
ReplyReply

That's a good question David.  I hate both ends of legal fights, which is why I never signed on to the class action suit against Epson.  I created this video to help X900 users who find themselves helplessly pinned in a corner, facing doom, with no hopeful way to get out.  This is not my business, in fact this only costs me.  Obviously Epson knows common people have access to the servpro.exe program.  You can't install a new head without it, and they sell X900 printheads to common people.  I don't plan to offer the program.  I don't need any more challenges than I have already..  Smiley

It is a good question.  I hope someone else has a better answer.
Logged

davidh202
Sr. Member
****
Offline Offline

Posts: 546


« Reply #1263 on: February 12, 2013, 08:30:04 PM »
ReplyReply

The big question I have is
After a year of your time and effort, do you still feel it is cost effective to even attempt to replace a head and possibly other ink related assemblies (Cap station -Dampers) while your inside the machine, with a possibility of something else screwing up, rather than for a few hundred $ more, just start from scratch with a new unit and warrantee?
Logged
Eric Gulbransen
Sr. Member
****
Offline Offline

Posts: 298


never surrender


WWW
« Reply #1264 on: February 12, 2013, 09:27:20 PM »
ReplyReply

The hidden drive behind my making this video is that I find a cure for clogged heads.  Then users will be able to remove them solo.  Apparently I am delusional because I still feel confident that a cure is findable.  If this happens, this video makes a lot of sense.  Even if it doesn't though, installing a new head for $1,400 still saves the machine in my eyes.  

Far as something screwing up, once you watch the video you'll understand for yourself - there are no mysteries to this process.  Just steps.  I am not a big risk taker.  If swapping a head yourself was a throw the chips in the air and hope they land right process, I'd be long gone a while ago.

Interesting point about the damper unit.  One thing I plan to do in the future is take apart an old, used, damper.  I'd like to see why one would need to be replaced.  What exactly is the difference, old to new.  I had an Epson tech on the phone just the other day who told me straight out that all the damper unit replacement "mumbo jumbo" was crap.  This guy was running his machine with dampers from 98, no problems.  I won't even get into what he said about using out of date ink...

By the way if you want to replace your damper unit, this same video will do you justice.  Premier Pro just exported it at Vimeo codec - it's 1.7gb.  That's too big.  Where's my framing hammer.
« Last Edit: February 12, 2013, 09:30:59 PM by Eric Gulbransen » Logged

Eric Gulbransen
Sr. Member
****
Offline Offline

Posts: 298


never surrender


WWW
« Reply #1265 on: February 12, 2013, 10:06:44 PM »
ReplyReply

Did I just say I am not a big risk taker?

I am again now one of the struggling masses.  I just sold our perfectly repaired, perfectly functioning Epson Stylus Pro 7900.  I have now re-inserted my neck in the noose.  The only X900 here anymore is a "fatally" clogged one...
Logged

Eric Gulbransen
Sr. Member
****
Offline Offline

Posts: 298


never surrender


WWW
« Reply #1266 on: February 13, 2013, 11:25:21 AM »
ReplyReply

The elephant is finally off my back.

...at lest one of them is.

Remember to go full screen, full HD.   Because why wouldn't you

LEARN HOW TO CHANGE YOUR OWN 7900/9900/11880 PRINTHEAD

I love you too..
« Last Edit: February 13, 2013, 11:27:39 AM by Eric Gulbransen » Logged

Dan Berg
Sr. Member
****
Offline Offline

Posts: 1519



WWW
« Reply #1267 on: February 13, 2013, 11:46:26 AM »
ReplyReply

Since I started all this. (Sort of)
I need to be the first one to respond.
Great job!
Look forward to more.
Thanks for all your efforts.
Logged

bill t.
Sr. Member
****
Offline Offline

Posts: 2693


WWW
« Reply #1268 on: February 13, 2013, 12:22:50 PM »
ReplyReply

Eric, that is just so well done!  When Spielberg sees that, yer outa here, dude!
Logged
Blue moon
Jr. Member
**
Offline Offline

Posts: 92


« Reply #1269 on: February 13, 2013, 05:25:36 PM »
ReplyReply

The elephant is finally off my back.

...at lest one of them is.

Remember to go full screen, full HD.   Because why wouldn't you

LEARN HOW TO CHANGE YOUR OWN 7900/9900/11880 PRINTHEAD

I love you too..
Eric
Not in the least bit surprised....its absolutely brilliant.....
Success with knobs on...
Love the damper cap device.....what a clever stroke !
What are you going to get up to next
Well done for all of us
Matt
Logged
enduser
Sr. Member
****
Offline Offline

Posts: 265


« Reply #1270 on: February 13, 2013, 05:41:55 PM »
ReplyReply

This:
  http://www.scribd.com/doc/91839121/EPSON-Pro-7900-and-9900-Field-Repair-Guide
might be of some use together with Eric's excellent video.
« Last Edit: February 13, 2013, 05:43:28 PM by enduser » Logged
Eric Gulbransen
Sr. Member
****
Offline Offline

Posts: 298


never surrender


WWW
« Reply #1271 on: February 13, 2013, 07:21:03 PM »
ReplyReply

I'm really glad you guys like the video.  Thought about it all day doing the framing hammer thing.  It's not perfect of course, already I see that I left out the part about unplugging the machine after power-down.  I'll have to add that clip and upload it again. 

enduser, thank you for that.

Next project - back to clearing X900 heads again.  I have new found motivation, since I don't have a functioning 7900 anymore.
Logged

Eric Gulbransen
Sr. Member
****
Offline Offline

Posts: 298


never surrender


WWW
« Reply #1272 on: February 14, 2013, 09:47:06 AM »
ReplyReply

Interesting - one cornered X900 user in Canada contacted me a week ago asking if the printhead video was done yet.  He told me he had just received his new head from Epson, but that it's part number was different than the part number we have been using.  The part number we have mentioned on this thread many times in the past is F191010.  But his replacement printhead part number is F191040.  When I do Google searches for this different part number I only get results in a foreign language, which Google Translate indicates is Italian.  I wonder what the difference is
Logged

iladi
Jr. Member
**
Offline Offline

Posts: 51


« Reply #1273 on: February 14, 2013, 12:07:09 PM »
ReplyReply

Good job Eric. Very well done. I wish you have made  this video last august when i,ve changed my damper assy. You,ve spared me me a lot of mess and emotions.
Logged
davidh202
Sr. Member
****
Offline Offline

Posts: 546


« Reply #1274 on: February 14, 2013, 05:59:27 PM »
ReplyReply

Could be he received the wrong head ...  aby normal Shocked
Another possibility is there has been a revision done to the head and given a new code #
« Last Edit: February 14, 2013, 06:03:31 PM by davidh202 » Logged
Blue moon
Jr. Member
**
Offline Offline

Posts: 92


« Reply #1275 on: February 16, 2013, 04:48:04 PM »
ReplyReply

I thought these articles from Jon Cone are helpful tips on printer maintenance:  http://www.inkjetmall.com/wordpress/category/maintenance/
...notably on humidity, infrequent printer use, and head strikes.

I haven't had any problems with my 9900, but I also use my 9900 very regularly and humidity levels are kept fairly constant in studio...

ken
Really helpful.....thanks Ken
Matt
Logged
Blue moon
Jr. Member
**
Offline Offline

Posts: 92


« Reply #1276 on: February 16, 2013, 06:32:47 PM »
ReplyReply

I'm getting the cold shoulder from Sigma Aldrich on the X-100 order.  It seems automated though, they're asking for documentation confirming this is a business, and they refuse to ship to a residential address.  I'll head underground and work this out another way tomorrow.

Guys
Got the Photoflo from Kodak yesterday !(6 weeks ordered )
Will be " drip-feeding " a  largish mixture about 2 feet above the disconnected head made of gylcol ,glycerol ,(epson clean solution )  Photoflo and water early next week ......down directly through a nipple on the disconnected head.....quickly followed by a back-syringe suck out through the same nipple....in a very gentle way....anyones guess what might happen..
Quite pleased  by the power of gravity generated from  that distance above the head...
Alan ....any idea of the amount of Photoflo that i should start with on experiment 1
Matt
Logged
Blue moon
Jr. Member
**
Offline Offline

Posts: 92


« Reply #1277 on: February 16, 2013, 08:04:49 PM »
ReplyReply

Hello there-




 I feel that if you can completely bypass the wiper blade you are setting yourself up for success.


Erik....yes or......  If the wiper blade could be persuaded to have a bath more often..



I also feel that if you can keep something moving through the print head while the print head is not in use (perhaps dial in the cleaning solution that has been mentioned here before) then you are creating a situation where there is a low probability for a clog to form inside the nozzle.

  Erik....Superb idea...

. On the other hand, chamois cloth is much more expensive, but worth it for this stage of the solution process, as a means. Chamois cloth is designed to clean fine surfaces and cutting up the cloth into smaller pieces,  and giving the print head a careful "shoe shine" is what I have in mind.  

Erik...If you could get the head cleaned without too much rubbing.....dont forget that your idea involves doing this often and the less friction the better..
While this is a subtle attempt the long term solution would be a pump with an auxiliary set of nozzles attached to the print head that gently (like 3ml a day gently) pumps a cleaning solution through the print head while the printer isn't in use.

Erik...It happens in water filtration systems where there is a reverse flow of water every 6 hours to clean out dirty filters...its called a " backwash system ".  Would work with printers ...the backwash would need to be a solution based liquid...and indeed the pumps already in the printer could be harnessed to do the backwashing...we would need to bypass the maintenance tank and go directly to a sink if possible....

Really enjoyed going through your concept Erik.....i am going to try doing the same approach but by means of gravity flow and drip feeding....same system as used on patients in hospitals....and of course the old syringe for pulling at the block from the opposite direction...will let you know what damage i can manage....
The beauty of your approach is that it would become a built in automatic self cleansing system.....rather a new concept for an Epson product...
Would love to see you make progress with this new approach...happy skiing....enjoyed vale etc a few years back now....great sports up there....
Matt


Logged
davidh202
Sr. Member
****
Offline Offline

Posts: 546


« Reply #1278 on: February 16, 2013, 09:07:28 PM »
ReplyReply

" the long term solution would be a pump with an auxiliary set of nozzles attached to the print head that gently (like 3ml a day gently) pumps a cleaning solution through the print head while the printer isn't in use.

Erik...It happens in water filtration systems where there is a reverse flow of water every 6 hours to clean out dirty filters...its called a " backwash system ".  Would work with printers ...the backwash would need to be a solution based liquid...and indeed the pumps already in the printer could be harnessed to do the backwashing...we would need to bypass the maintenance tank and go directly to a sink if possible"....


Pretty daft idea if you ask me.
Most people here are complaining about wasting ink and a method such as this a surefire way to accomplish that!

Putting cleaning solution through the head at a regular interval means you would be flushing the existing ink out,then the head would need to have the cleaning solution flushed out with ink, and re charged with even more ink before printing. Roll Eyes
That's equates to three times or more the amount of ink going into the waste tank or "down the drain"
Not to mention more nozzle checks done before printing to make sure that there are no clogs or drop outs.

Sorry...
Back to the drawing board!

  
« Last Edit: February 16, 2013, 09:09:14 PM by davidh202 » Logged
enduser
Sr. Member
****
Offline Offline

Posts: 265


« Reply #1279 on: February 17, 2013, 05:11:34 AM »
ReplyReply

What if clogging is just what happens when a nozzle and/or its channel has simply reached the end of its life?  What if clogs begin when a nozzle just doesn't fire anymore?
Logged
Pages: « 1 ... 62 63 [64] 65 66 ... 73 »   Top of Page
Print
Jump to:  

Ad
Ad
Ad