Ad
Ad
Ad
Luminous Landscape Forum > Raw & Post Processing, Printing > Printers, Papers and Inks > Moving IPF 8300
Pages: [1]   Bottom of Page
Print
Author Topic: Moving IPF 8300  (Read 637 times)
lmsolo
Newbie
*
Offline Offline

Posts: 5
« on: July 05, 2012, 01:50:55 PM »
 ReplyReply
Hi all,

I need some advice regarding moving my printer.

We are being moved by a pro moving company and they require the ink tanks removed. It is a move via truck and the manual says that is considered a level 1. It says no ink needs to be disposed of and that it requires 0-1 maintenance cartridges (my cart is at 40% right now).

I am a little confused about removing the tanks. Will that cause the ink to leak from the tubing? If I remove the tanks do I have to do a level 3 drain?

Thanks for any advice.

Lisa
Logged
narikin
Sr. Member
****
Offline Offline

Posts: 762
« Reply #1 on: July 05, 2012, 02:48:05 PM »
 ReplyReply
It's all in the manual IIRC. really depends on what angle the machine will go at as it moves. If it stays nearly flat, then you are fine, if it starts to be up-ended, stairs, manhandling through tight doorways, elevators that require tilts, etc, then you need to drain it properly.

 
Logged
lmsolo
Newbie
*
Offline Offline

Posts: 5
« Reply #2 on: July 05, 2012, 03:32:01 PM »
 ReplyReply
I understand and have read the info re: level 1, 2 and 3 re: tipping angles etc. I am wondering if the removal of the tanks will require a level 3 draining. Although this move would not require taking the tanks out (moving by truck 1.5 hours down the road), the movers are insisting that the tanks come out.

Thanks again.

Lisa
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad