Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: D800 High Speed Exposure Bracketing  (Read 875 times)
hcubell
Sr. Member
****
Offline Offline

Posts: 729


WWW
« on: October 11, 2012, 02:13:29 PM »
ReplyReply

Is there a way to program a D800 so that I can press a button and the D800 will shoot a high speed bracket of three exposures, one at the indicated exposure, one at 2 stops down and one at 2 stops over?
Thanks.
Logged

Ellis Vener
Sr. Member
****
Offline Offline

Posts: 1726



WWW
« Reply #1 on: October 11, 2012, 02:36:47 PM »
ReplyReply

there is a bracket mode. There is high fps  (4fps) setting. and you can use the two together.

But if you mean faster than 4fps, no.
Logged

Ellis Vener
http://www.ellisvener.com
Creating photographs for advertising, corporate and industrial clients since 1984.
hcubell
Sr. Member
****
Offline Offline

Posts: 729


WWW
« Reply #2 on: October 11, 2012, 02:42:08 PM »
ReplyReply

Thanks, Ellis. 4 FPS is ok, but I wonder how you set that up so that you can press a button nad it happens. I don't want to have to go into a series of menu items to set it up each time I use it, and then reverse the changes.
Logged

RFPhotography
Guest
« Reply #3 on: October 11, 2012, 02:58:07 PM »
ReplyReply

Don't know about the D800 but with the D700 the Depth of Field Preview button can be programmed to shoot the AEB sequence with one press.  Small problem; however, in that the D800, like the D700, is limited to 1 stop spacing.  In order to get the 2 stops you want you're going to need 5 shots.
Logged
Jan Morales
Jr. Member
**
Offline Offline

Posts: 71



WWW
« Reply #4 on: October 11, 2012, 03:56:56 PM »
ReplyReply

If you have a remote cord you can do it. I use a MC-36 cord and I'm sure it works with others. I program the bracket and set the release mode dial to continuous high speed. To shoot the bracket I slide the shutter-release button to the hold position. The camera will make all the exposures in the bracket in rapid succession and then stop. To shoot a new bracket take the shutter-release button out of the hold position and repeat.
Logged
kers
Sr. Member
****
Offline Offline

Posts: 720


WWW
« Reply #5 on: October 11, 2012, 05:04:31 PM »
ReplyReply

there is a knob on top of the camera - press it and dial at the same time for

bracketing gaps  (front dial)   0,33 stops 0,67 stops or 1 stop ( no 2 stops sorry)
or
amount of exposures ( rear dial)  2 exposures  -1, 0    or 0, +1   - No bracketing-    3 exposures    -1, 0, +1     5 exp... 7 exp...    9 exp..   

it is quickly done as soon you are familiar with it.. but -2, 0, +2  does not exist-
it will be 5 exposures
 
Logged

Pieter Kers
www.beeld.nu
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad