Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Old Metz CT45-1 -> Bring back to life  (Read 1193 times)
julienlanoo
Full Member
***
Offline Offline

Posts: 228


« on: November 04, 2012, 08:06:50 AM »
ReplyReply

Hi, guys,
i've got 2 old Metz CT45-1, that i haven't used for years..

But now i have a job where i could use them..
Now i load them with brand new Batteries ( you know the AA holders , as the rechargeable once aren't working), ..
And no response at all .. Any idea's what to do ?..

I am now keeping them loaded with fresh batteries ( every 3 h changing them) may be it will get some energy in the capacitors ..

Any other thoughts ?
Logged
ARD
Sr. Member
****
Offline Offline

Posts: 296



WWW
« Reply #1 on: November 04, 2012, 05:45:46 PM »
ReplyReply

Have you checked the battery connections for oxidisation?. They might need cleaning if the camera has not been used for years
Logged
K.C.
Sr. Member
****
Offline Offline

Posts: 650


« Reply #2 on: November 04, 2012, 11:35:09 PM »
ReplyReply

The capacitors have probably dried up from lack of use.
Logged
julienlanoo
Full Member
***
Offline Offline

Posts: 228


« Reply #3 on: November 05, 2012, 05:20:56 AM »
ReplyReply

That was it, after 1 day of loading fresh batteries, suddenly there was Life Smiley LIFE!!!

Now i put a trigger timer on them ( Pocket wizards ), so they flash every 7 minits Smiley just to get some loading done Smiley works perfect! ..

I see them getting better by the minute..

By the way i have an old CT 60 to , but there the batt is completely death, any tips on where i can buy them online?..


greets
ju
Logged
julienlanoo
Full Member
***
Offline Offline

Posts: 228


« Reply #4 on: November 05, 2012, 12:04:11 PM »
ReplyReply

Funny story,
So i was bringing, those flash heads back to life...
Changing the batteries with loaded ones and so on.. And letting them trigger every 7 minits, ( via pocket wizards), just to get some juice through the capacitors ( remarkable performance change since yesterday ).

Now i've got a visit from the police Smiley my window ( on the street was open) and some neighbours though something was exploding Smiley :p:p

Hehe Smiley now the cops had a good laugh Smiley hehe
Logged
Jack Varney
Sr. Member
****
Offline Offline

Posts: 392


WWW
« Reply #5 on: November 05, 2012, 07:49:30 PM »
ReplyReply

Caution bear in mind that the CT45-1 has a trigger voltage in excess of 200vdc! Mine meters at 221vdc. Modern camera PC circuits will not tolerate more than 10 to 20vdc.
Logged

Jack Varney
julienlanoo
Full Member
***
Offline Offline

Posts: 228


« Reply #6 on: November 06, 2012, 12:43:41 PM »
ReplyReply

ah , bu t i don't want to attach it directly to my Digiback, it's for RF use only Smiley
Logged
Jack Varney
Sr. Member
****
Offline Offline

Posts: 392


WWW
« Reply #7 on: November 07, 2012, 08:16:34 PM »
ReplyReply

Then be sure your RF unit can withstand the trigger voltage to avoid cooking the RF unit.
Logged

Jack Varney
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad