Ad
Ad
Ad
Pages: « 1 [2]   Bottom of Page
Print
Author Topic: Testing protocol for new hard disk drives?  (Read 3897 times)
dreed
Sr. Member
****
Offline Offline

Posts: 1260


« Reply #20 on: December 28, 2012, 08:41:02 AM »
ReplyReply

Based partly on recommendations in this thread http://www.luminous-landscape.com/forum/index.php?topic=72320.msg575810#new and on other research last week I purchased 5  Western Digital 3 TB Red drives for a RAID 5 or RAID configuration (probably will go with RAID 5). I order 5 instead of just 4  so I will have a spare on hand and also in case one tests bad straight of the box

The question now is: how to to test the drives once they arrive?

Any protocol or tools you recommend?
I already have current versions of DiskWarrior and Techtools

Exactly what problems do you want to try and detect with your testing?

Do you just want to check that it all works once it is plugged together?
Do you want to verify the ability of your RAID solution to function as a RAID solution?
Do you just want to read/write every block on every disk to ensure they're all readable/writable?
Do you want to test throughput?
Do you want to test how long it takes to copy 100 images onto the disks?
What are your expectations at the end of the testing?
Logged
kers
Sr. Member
****
Offline Offline

Posts: 773


WWW
« Reply #21 on: December 28, 2012, 10:06:30 AM »
ReplyReply

When i start using a new HD i do a Smart check and a complete surface scan... ( using Tech tool Pro)
Smart checks are done automatically when in use and every year i do a surface scan of all my HD's ( also my archived data)

I had some new disk failing in the past and lost some data , so i am aware it is necessary to keep on checking all disks frequently...
Logged

Pieter Kers
www.beeld.nu
Pages: « 1 [2]   Top of Page
Print
Jump to:  

Ad
Ad
Ad