Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Unexpected Print Orientation (Epson 4880, LR4)  (Read 452 times)
stephent
Newbie
*
Offline Offline

Posts: 8


WWW
« on: December 08, 2012, 03:31:14 PM »
ReplyReply

I'm trying to print from LR4 to an Epson 4880 onto Moab Entrada 13 x 12" paper.

I previously had this working just fine on my previous laptop and with LR3. However, in my most recent attempt, the image did not print as expected. The first attachment shows the Print layout in LR4. The second shows how it actually printed.

The image has printed too close to the left edge of the paper and not as shown in the LR preview. I can't see a way to change the paper feed orientation to get this to print correctly.

Does anyone have any thoughts on other settings to check?

Thanks in advance!

Stephen
Logged

Alan Goldhammer
Sr. Member
****
Offline Offline

Posts: 1576


WWW
« Reply #1 on: December 08, 2012, 04:47:43 PM »
ReplyReply

Check the Epson print driver setting to make sure it has the correct paper orientation (landscape/portrait) and size (I assume this is a custom size?).  Also make sure in LR all the margin settings are correct.  Those are just what occurs to me off the top of my head.
Logged

Dan Berg
Sr. Member
****
Offline Offline

Posts: 1494



WWW
« Reply #2 on: December 09, 2012, 04:03:49 AM »
ReplyReply

You have the template in the upper shot set to print edge to edge which would print over the holes,not sure you want that.
The layout at the top shows borderless on your template but looking at the paper coming out of the printer the paper has borders on all four sides. What size image are you trying to get? (Looks like in your upper layout you have 10h x12w set.
Is that the orientation you want for your image?
« Last Edit: December 09, 2012, 08:15:01 AM by Dan Berg » Logged

Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad