This is exactly the way of reasoning that I wanted to suggest. Rather than claiming that some arbitrary airy-disk distance is the absolute limit for spatial information recoverable, it seems reasonable to assume that diffraction leads to a gradual loss of practical resolution due to vanishing (high-spatial-frequency) contrast. The limit is likely to depend somewhat on input, raw processing etc.

Indeed. As an additional (auxiliary) module of my webpage with the free

Slanted Edge Analysis tool, I provide a tool, under Step 4, that can be used to calculate the theoretical (under optimal no noise, etc. conditions) resulting Optical Transfer Function performance. The (comma and space separated) tabulated data allows to copy/paste and parse the different components for graphical representation of various MTF scenarios (only diffraction at 564nm, OTF of diffraction plus defocus, MTF of lens+demosaicing, different apertures, different sensel pitches).

A very good lens at its optimal aperture (e.g. f/4) can typically reach a blur diameter with sigma 0.7, and at f/16 that blur could be increased to a sigma of 1.1 (depending on the actual lens). It will show how a smaller sensel pitch will come closer to resolving whatever resolution (MTF at the various levels of detail) is left to be had after diffraction (and defocus) took their share of the input signal contrast levels.

Here are two examples of the MS Excel converted graphical output from an optimal aperture f/4 scenario on a Nikon D800, compared to the OTF, and the only diffraction limited MTF (only relevant frequencies up to 'Nyquist' are given):

Where despite the good lens, the performance is still clearly limited (mostly) by the MTF of the lens.

And an f/16 scenario on a Nikon D800, compared to the diffraction only limited MTF, and the OTF (diffraction + limited COC) :

Where the limitations by the lens, and the diffraction (even when including the 1.5x sensel pitch DOF zone limits in the COC and resulting OTF) are compared.

The MTF in the above data is a close approximation of the actual system performance by using the Slanted Edge analysis as indicated on the webpage (and help pages). The OTF and Diffraction limit curves are models, based on the given input parameters and the explanation by David Jacobson (

http://photo.net/learn/optics/lensTutorial).

Cheers,

Bart