Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Two prints. Same image. Different days. WAY different  (Read 1784 times)
rgvsdigitalpimp
Sr. Member
****
Offline Offline

Posts: 289


« on: January 08, 2013, 01:39:13 PM »
ReplyReply

Hey guys wanna see if you all would have any ideas why the same image would print totally different within a couple days time frame.  Only thing I could remember when I originally printed it was that my RGB workspace in Adobe Photoshop was set to the monitor profile that my Colormunki Photo made.  Once I read that was wrong, I switched it back to AdobePro I believe.  The picture on the right is the reprint.  The one on the left is the original print already coated.  One thing.  When I reprinted, my printer was pretty much out of yellow ink.  I swapped it right after this print.  Would that make the colors look so different?  Does my hardware have to be recalibrated?  Also, I will be receiving new canvas paper from another manufacturer tomorrow and I will be making the paper profile with the Colormunki.  When it prints the test sheets, how long should I wait for the canvas to dry before measuring the color with the device?  If I already have the test sheets for that paper that I did a couple weeks ago, can I use the same test sheets?  Or do I have to print new ones everytime I re-profile?

Edited: Forgot to add the attached image of both images
« Last Edit: January 08, 2013, 02:18:14 PM by rgvsdigitalpimp » Logged
digitaldog
Sr. Member
****
Offline Offline

Posts: 9114



WWW
« Reply #1 on: January 08, 2013, 03:02:14 PM »
ReplyReply

IF you tagged the image with the display profile (which you now know is wrong), then fixed it, it is possible the color appearance would look different and perhaps you edited it?

The other possibility is a nozzle was (or is) clogged.

Let the Canvas dry down a good 24 hours before first measurement.
Logged

Andrew Rodney
Author “Color Management for Photographers”
http://digitaldog.net/
rgvsdigitalpimp
Sr. Member
****
Offline Offline

Posts: 289


« Reply #2 on: January 08, 2013, 03:06:25 PM »
ReplyReply

Digital, how do I check for a clogged nozzle? Will status monitor tell me?
Logged
digitaldog
Sr. Member
****
Offline Offline

Posts: 9114



WWW
« Reply #3 on: January 08, 2013, 03:14:11 PM »
ReplyReply

I may have made an incorrect assumption you're using some kind of ink jet printer. There should be some utility that will print a test that shows if a nozzle is clogged.
Logged

Andrew Rodney
Author “Color Management for Photographers”
http://digitaldog.net/
rgvsdigitalpimp
Sr. Member
****
Offline Offline

Posts: 289


« Reply #4 on: January 08, 2013, 04:39:27 PM »
ReplyReply

I'm printing on a Canon ipf8300
Logged
jonathan.lipkin
Full Member
***
Offline Offline

Posts: 148



« Reply #5 on: January 16, 2013, 10:12:21 AM »
ReplyReply

Switching ink cartidges should not affect the color of your prints. I think it's more likely you had a setting wrong in the photoshop print dialog in one of the printts. It's quite easy to do if you're not careful. Perhaps you applied the wrong profile in one and not the other.
Logged
eronald
Sr. Member
****
Offline Offline

Posts: 4036



« Reply #6 on: January 20, 2013, 10:01:48 PM »
ReplyReply

What is your computer and *exact* software version?

Edmund
Logged
jsiva
Jr. Member
**
Offline Offline

Posts: 99


« Reply #7 on: January 22, 2013, 10:34:46 PM »
ReplyReply

This may sound a little out there, but are you using a Mac by any chance and have you recently done any minor upgrades on OSX?  I just had week long hair pulling session trying to figure out what happened to all my custom profiles and somehow things went wonky.
Logged
rgvsdigitalpimp
Sr. Member
****
Offline Offline

Posts: 289


« Reply #8 on: January 28, 2013, 11:39:06 PM »
ReplyReply

Sorry for the slow responses. For some reason unknown this problem has just stopped.  Re-calibrated and did my profiles again (due to PC upgrade) and everything is working good.  I use a PC with Adobe PS6, OnOne Perfect Resize Pro, and a Canon ipf8300.  I use a ColorMunki photo for profiles.
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad