Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Hasselblad H3DII-39 voltage?  (Read 651 times)
epines
Full Member
***
Offline Offline

Posts: 169


WWW
« on: January 10, 2013, 03:55:51 PM »
ReplyReply

Does anyone know the voltage of the H3DII-39 back? I just received a Tekkeon external battery (for powering it on my Arca Swiss without being tethered), and I need to set the voltage output on the battery.

thanks
ethan

Logged

Nick-T
Sr. Member
****
Offline Offline

Posts: 462


« Reply #1 on: January 10, 2013, 04:05:30 PM »
ReplyReply

I'm afraid I don't know the answer to this one. Firewire voltage seems to vary quite a bit (between 12 and 30V). I would excercise caution before connecting anything.
Nick-T
Logged

epines
Full Member
***
Offline Offline

Posts: 169


WWW
« Reply #2 on: January 10, 2013, 04:15:53 PM »
ReplyReply

Thanks, Nick. From what I can tell, the camera's battery grip provides an output of 7.5V, so I'll start there and work my way up until the back powers on.

Happy to hear from anyone else who knows this info.

ethan

 
Logged

Gel
Full Member
***
Offline Offline

Posts: 159


Excuse me while I bust a cap


« Reply #3 on: January 10, 2013, 05:11:46 PM »
ReplyReply

The battery grips are 9.6v and 7.2v. This would suggest the body takes what it needs. Find out properly though.
Logged

Chris Giles Photography
epines
Full Member
***
Offline Offline

Posts: 169


WWW
« Reply #4 on: January 11, 2013, 11:01:05 AM »
ReplyReply

Answer: The voltage the back requires is definitely 7.5V. I started at 6V; not enough juice. Then 6.5V; same. 7.5V: all good. Makes sense. The Hasselblad datasheet for the 7.2V battery grip says it has an output of 7.5V.

Thanks, everyone.

ethan

 
Logged

Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad