i1Profiler 1.4 with scanner support?

[Doyle Yoder]

http://www.photographyblog.com/news/i1pro_2_spectrophotometer_receives_if_award/
http://blog.xritephoto.com/
http://xritephoto.com/ph_product_overview.aspx?id=1914&catid=109&action=overview
http://www.cnprint.org/bbs/thread/81/188145/

Is it available to download somewhere is is a pay for upgrade?

[digitaldog]

Free update (once it's posted)

[Czornyj]

Are there any other improvements, or only scanner profiling module?

[digitaldog]

Are there any other improvements, or only scanner profiling module?

I think that's about it. We might discover some new bugs <g>.

[Doyle Yoder]

Just show in "Check for Upadate".

[Doyle Yoder]

X-Rite i1Profiler 1.4.2 Release Notes

New for the 1.4.2 Release

The following features and improvements have been added for this release:

Scanner Profiling  - Added support for the following scanner targets:

X-Rite ColorChecker 24
X-Rite ColorChecker SG
LaserSoft Reflective IT 8.7/2
LaserSoft Transmissive 4x5 and 35mm IT 8.7/1
Wolf Faust Reflective IT 8.7/2
Wolf Faust Transmissive 4x5 and 35mm IT 8.7/1

CGATS Functionality - Improved the support for "SampleID", "SAMPLE_NAME", and "Sample_Loc" column types.

Made enhancements for custom output column selections. Made location information content optional in "SAMPLE_NAME" column.

Added support for P2P and other popular single-page color control wedges.

Dropped support for MacOS 10.5.x (Leopard.)

[BartvanderWolf]

X-Rite i1Profiler 1.4.2 Release Notes

New for the 1.4.2 Release

The following features and improvements have been added for this release:

Scanner Profiling  - Added support for the following scanner targets:

X-Rite ColorChecker 24
X-Rite ColorChecker SG
LaserSoft Reflective IT 8.7/2
LaserSoft Transmissive 4x5 and 35mm IT 8.7/1
Wolf Faust Reflective IT 8.7/2
Wolf Faust Transmissive 4x5 and 35mm IT 8.7/1

Hi,

I just tried profiling an Epson V700 with a ColorChecker SG , using VueScan as driver/scannner application, and the result seems okay (although many of the Yellows had an out of gamut Blue channel < 0). Overall the reported Delta E's were low enough for comfort (0.3-0.5), and visually only one Orange patch looked slightly more saturated after applying and softproofing with all profiles.

Maybe I'll try it on a DSLR as scanner, and see what happens.

Cheers,
Bart

[smilem]

SIPC - Scanner ICC Profile Creator worked better than PM5 or Match3.

[pfigen]

No support for Hutch???

[aaronchan]

No support for Hutch???

or i would say they don't support any custom chart!

[rasworth]

Profiled two scanners with the cc24, a reasonably good Microtec 16bit and an inexpensive all-in-one Epson Artisan.  I thought the results were good - interestingly (at least to me) not only did the profile correct color rendition, it also normalized brightness.

The two raw scans were significantly different in the rgb values on the neutral patches; after assigning the respective profiles to the original cc images and converting each to a sRGB, the brightest white patch measured out at 245 on both, second patch 200, etc.  And the colors matched closely, all in all seems to be quite useful.

Richard Southworth