Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: IPF8100 air bubble ink line  (Read 513 times)
SJC56
Newbie
*
Offline Offline

Posts: 3


« on: February 05, 2013, 11:23:24 AM »
ReplyReply

 We have an 8100 with a bubble in the PM line, I can see it right by the ink head. Canon says I we need a service call at $1600, ouch, anyway I can purge this on my own or are there special tools involved.
Logged
Scott Martin
Sr. Member
****
Offline Offline

Posts: 1311


WWW
« Reply #1 on: February 05, 2013, 11:50:00 AM »
ReplyReply

It'll purge itself with usage. Bubbles are often caused by 1) a mis-seated head or 2) low vacuum due to under-usage. You can remove and reseat the head, pushing the black seat between you and the head firmly towards the head. Or can you ignore this and see if it ever actually causes any problems.

If you're not already, leave the printer on 24/7 and print at least one 8x10 every week. Under-usage is the leading cause of problems on these machines, IMO.
Logged

SJC56
Newbie
*
Offline Offline

Posts: 3


« Reply #2 on: February 05, 2013, 12:32:02 PM »
ReplyReply

 Thing is it will not let me print all I can do are test prints.
Logged
Czornyj
Sr. Member
****
Online Online

Posts: 1370



WWW
« Reply #3 on: February 05, 2013, 12:41:53 PM »
ReplyReply

I'd initialize head change procedure (at your own risk), it managed to suck out my air bubble from ink line.
Logged

SJC56
Newbie
*
Offline Offline

Posts: 3


« Reply #4 on: February 05, 2013, 12:58:54 PM »
ReplyReply

 I have replaced the head twice before it was figured out about the bubble, (Canon sent me one under warranty) so I'll hold off on that but it's a good idea.
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad