Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: SWC ground glass reassembly help needed !  (Read 429 times)
Paul Ozzello
Full Member
***
Offline Offline

Posts: 203



WWW
« on: February 18, 2013, 01:39:45 PM »
ReplyReply

Update:

For anyone interested, I found a link to the Hasselblad Accessories manual that contains an exploded view of the ground glass adapter.

http://www.galerie-photo.com/manuels/hasselblad-manuel-accessoires.pdf

Paul

Hi,

I have a later version of the ground glass adapter for Hasselblad SWC/M that I took apart after some snow got into the fresnel - I wasn't taking notes and I'm not sure which order some of the parts should go...  Roll Eyes

I have the direction of glass and fresnel figured out but not the rest, how should the 4 rubber washers with 'feet' and two rubber spacers with ridges be installed ? What about the 2 spring plastic clips ?

I know I know... I should send it to Hassy but I'd rather not be out of the camera for another 3 weeks (I recently sent the body in for CLA) and this seems like a pretty straightforward assembly.


Thanks,


Paul
« Last Edit: February 18, 2013, 03:44:25 PM by Paul Ozzello » Logged

Ed Foster, Jr.
Full Member
***
Offline Offline

Posts: 219


WWW
« Reply #1 on: February 18, 2013, 07:25:58 PM »
ReplyReply

Paul,
That will teach you not to take phone cam shots when disassembling! Seriously, though, I've been there and done that. Thanks for posting the manual. I've saved it locally for future reference for the next time I undertake - or think of undertaking - a Hasselblad DIY project.

Good Luck,
Ed
Logged

Ed Foster, Jr.
www.edfoster.net
Paul Ozzello
Full Member
***
Offline Offline

Posts: 203



WWW
« Reply #2 on: February 18, 2013, 08:14:01 PM »
ReplyReply

Paul,
That will teach you not to take phone cam shots when disassembling! Seriously, though, I've been there and done that. Thanks for posting the manual. I've saved it locally for future reference for the next time I undertake - or think of undertaking - a Hasselblad DIY project.

Good Luck,
Ed


Hahah, turns out I wasn't such a dumb bunny - i had done it correctly :-) I recently had the camera CLAed and what I thought were focusing problems was a
problem with the ground glass. Subjects at infinity were out of focus in the viewfinder but razor sharp on film (at infinity focus). I ended up shimmying the ground glass with a layer of film and now it's perfect. You'll find service manuals for all hasselblad cameras on the same website. 

http://www.galerie-photo.com/mode-emploi-appareil-photo.html

Paul

Logged

Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad