Ad
Ad
Ad
Pages: « 1 ... 45 46 [47] 48 49 ... 83 »   Bottom of Page
Print
Author Topic: Re: Recent Professional Works 2  (Read 270780 times)
Phil Indeblanc
Sr. Member
****
Offline Offline

Posts: 1108


« Reply #920 on: November 21, 2013, 01:34:10 PM »
ReplyReply

Thought for a second you took it down for a revise :-P
I was having a browser issue i guess.

Thats just a beauty! with a beauty of a picture to go with it. :-)
Sure would love one of these to continue where my Nuovo Simonelli Oscar left off.
These heads are like the lever style as La Marzocco GS3
That water tray looks like what I put in my shower...nice touch!

Very nice work MrSmith! I wonder what shots like that, or a group of 3-5 go for in the UK?
« Last Edit: November 21, 2013, 01:52:07 PM by Phil Indeblanc » Logged

If you buy a camera, you're a photographer...
MrSmith
Sr. Member
****
Offline Offline

Posts: 918



WWW
« Reply #921 on: November 21, 2013, 02:35:03 PM »
ReplyReply

The lever group (made by CMA)is the same as a lot of other more expensive machines. The 1 group machine is 1950 and the 2 group 4500
Logged
TMARK
Sr. Member
****
Offline Offline

Posts: 1843


« Reply #922 on: November 21, 2013, 02:37:26 PM »
ReplyReply

Beautifu machine.



The lever group (made by CMA)is the same as a lot of other more expensive machines. The 1 group machine is 1950 and the 2 group 4500
Logged
Phil Indeblanc
Sr. Member
****
Offline Offline

Posts: 1108


« Reply #923 on: November 21, 2013, 02:43:13 PM »
ReplyReply

CMA, one of the largest, they make parts for a lot of the machines out there. Take a look at the Speedster by Westen  That would be fun to photograph!

Logged

If you buy a camera, you're a photographer...
wolfnowl
Sr. Member
****
Offline Offline

Posts: 5807



WWW
« Reply #924 on: November 22, 2013, 01:46:19 AM »
ReplyReply

those angles appease my visual sensibilities.
Indeed!  Interesting angles!
Logged

If your mind is attuned to beauty, you find beauty in everything.
~ Jean Cooke ~


My Flickr site / Random Thoughts and Other Meanderings at M&M's Musings
mitchino
Jr. Member
**
Offline Offline

Posts: 64


« Reply #925 on: November 22, 2013, 03:53:20 AM »
ReplyReply

I like these shots a lot, but I'm amazed you actually physically cut the saw blade! I hope you don't mind my asking, but what did the magazine pay for these two shots? I have a similar potential job at the moment for a small design agency and I'm unsure what to quote.
Logged
MrSmith
Sr. Member
****
Offline Offline

Posts: 918



WWW
« Reply #926 on: November 22, 2013, 04:15:43 AM »
ReplyReply

I'm not going to tell you but I felt it was a reasonable rate for a trade only editorial magazine of 90'000 circulation but less than my lower advertising/design rate. Im in the U.K. So I expect its lower than a US day rate.
What you charge is dependent on usage and what kind of client, these will only ever appear in the magazine once then after a year the licence expires, the fee's reflect this.

We cut them because we could and it wasn't that expensive.
Logged
Phil Indeblanc
Sr. Member
****
Offline Offline

Posts: 1108


« Reply #927 on: November 22, 2013, 11:57:31 AM »
ReplyReply

I doubt they are lower than the States, if it is direct to client.
Logged

If you buy a camera, you're a photographer...
Yelhsa
Full Member
***
Offline Offline

Posts: 113


WWW
« Reply #928 on: November 22, 2013, 12:57:32 PM »
ReplyReply

I'm not going to tell you but I felt it was a reasonable rate for a trade only editorial magazine of 90'000 circulation but less than my lower advertising/design rate. Im in the U.K. So I expect its lower than a US day rate.
What you charge is dependent on usage and what kind of client, these will only ever appear in the magazine once then after a year the licence expires, the fee's reflect this.
Would agree.

Media use: 1 media only, rather than possibly 2 media or even multiple media.
Period of use: 60 days only, rather than 1 year or possibly more.
Territory of use: UK only, rather than Europe or the USA.

Licence fee based on the above - and so, because the use is less than what is considered to be Standard use*, then a discount is often applied here, e.g. your BUR-50%.

*Standard use being either 2 media for 1 years use or 1 media for 2 years use, in 1 region - according to the AOP.
Logged

MrSmith
Sr. Member
****
Offline Offline

Posts: 918



WWW
« Reply #929 on: November 22, 2013, 01:02:24 PM »
ReplyReply

Unless it was for a trendy style/fashion mag then the fee would be 0
Logged
Yelhsa
Full Member
***
Offline Offline

Posts: 113


WWW
« Reply #930 on: November 22, 2013, 01:08:41 PM »
ReplyReply

Unless it was for a trendy style/fashion mag then the fee would be 0
In that case, it would be like you were saying, the Licence fee based on the above = your BUR-100%.
 
« Last Edit: November 23, 2013, 12:17:34 AM by Yelhsa » Logged

Eric Myrvaagnes
Sr. Member
****
Offline Offline

Posts: 8205



WWW
« Reply #931 on: November 22, 2013, 02:02:08 PM »
ReplyReply

We cut them because we could and it wasn't that expensive.
With a little glue and duct tape you could make that saw blade almost like new.  Grin
Logged

-Eric Myrvaagnes

http://myrvaagnes.com  Visit my website. New images each season.
Rob C
Sr. Member
****
Offline Offline

Posts: 12213


« Reply #932 on: November 22, 2013, 02:07:32 PM »
ReplyReply

With a little glue and duct tape you could make that saw blade almost like new.  Grin



So that's who supplies them!

Good weeding, Eric.

Rob C
Logged

Slobodan Blagojevic
Sr. Member
****
Offline Offline

Posts: 6180


When everybody thinks the same... nobody thinks.


WWW
« Reply #933 on: November 24, 2013, 03:17:08 PM »
ReplyReply

Given that I am getting paid for a jewelry shoot, I hope I can post some of them here?

Logged

Slobodan

Flickr
500px
Eric Myrvaagnes
Sr. Member
****
Offline Offline

Posts: 8205



WWW
« Reply #934 on: November 24, 2013, 07:37:12 PM »
ReplyReply

Nicely done, SB.

If they were mine, I'd be tempted to do a little more PP to get rid of the chewing gum (wax) that holds them up, especially in the second one.
But they're certainly much better than I could do with such subjects.

-Eric

P.S. If you need help with PP, there's a guy on the forum who is a real whiz at such stuff. His name is Slobodan...  Wink
Logged

-Eric Myrvaagnes

http://myrvaagnes.com  Visit my website. New images each season.
Slobodan Blagojevic
Sr. Member
****
Offline Offline

Posts: 6180


When everybody thinks the same... nobody thinks.


WWW
« Reply #935 on: November 24, 2013, 08:03:23 PM »
ReplyReply

Yes, Eric, that is exactly the sticky point Grin

Have not taken them yet to PS (LR is not well suited for that type of correction), as I still have tons of pieces to shoot. In the meantime, I ordered Crystal Clear Museum Wax, (Simon Harper's recommendation), hoping that it will be less visible than the slightly opaque one used for those shots. I am also getting used to just how small the quantity of the damn wax is needed: every time I think that's it, turns out you can get away with a half of it. Kind of down to microscopic quantities.

As an alternative, the client is ok with simply cropping out the very bottom, as the top is what counts anyway (but, pssst, do not tell Russ!). That solution might save me tons of work in PS too.

I posted them here with the wax also to gauge the reaction, i.e., to see just how much people are bothered by it. I guess they are.
« Last Edit: November 24, 2013, 08:05:11 PM by Slobodan Blagojevic » Logged

Slobodan

Flickr
500px
ACH DIGITAL
Sr. Member
****
Offline Offline

Posts: 384



WWW
« Reply #936 on: November 24, 2013, 08:49:46 PM »
ReplyReply

Slobodan, simple surf wax for tropical waters is even better than many of the expensive specialized product out there. I've tryied them all and stick to this one. It's harder so heavy rings won't fall down!
« Last Edit: November 25, 2013, 06:03:49 AM by ACH DIGITAL » Logged

Antonio Chagin
www.achdigital.com
Phil Indeblanc
Sr. Member
****
Offline Offline

Posts: 1108


« Reply #937 on: November 25, 2013, 02:29:22 AM »
ReplyReply

Cool Slobodan, would be nice to see the finished images.

Logged

If you buy a camera, you're a photographer...
Phil Indeblanc
Sr. Member
****
Offline Offline

Posts: 1108


« Reply #938 on: November 25, 2013, 02:36:20 AM »
ReplyReply

Is this one area the MF would excel?
Logged

If you buy a camera, you're a photographer...
KLaban
Sr. Member
****
Offline Offline

Posts: 1703



WWW
« Reply #939 on: November 25, 2013, 06:37:43 AM »
ReplyReply

Is this one area the MF would excel?

Sure is.

http://www.hartleystudios.com/
Logged

Pages: « 1 ... 45 46 [47] 48 49 ... 83 »   Top of Page
Print
Jump to:  

Ad
Ad
Ad