Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: synar emotion75 to this camera  (Read 1369 times)
andreart
Newbie
*
Offline Offline

Posts: 5



WWW
« on: March 07, 2013, 02:08:09 AM »
ReplyReply

how to connect synar emotion75 to this camera :

Logged

ced
Sr. Member
****
Offline Offline

Posts: 268


« Reply #1 on: March 07, 2013, 02:35:01 AM »
ReplyReply

1st of all it is SINAR and if you meant the drink(not for me Cynar)but I guess it is the former.
I would not interface to this flimsy looking camera, the lock down points don't look very precise and sturdy.
Wonder too about the lens if it will meet the resolution requirements.
If you are determined then you need an appropriate Graflock interface plate that slots in where the film cassette goes in.
These exist in Hassy V + H, Mamiya 645, Contax 645 etc. a sync cable from the back to the lens.
I think on the Sinar website you should find additional info.
Logged
torger
Sr. Member
****
Offline Offline

Posts: 1612


« Reply #2 on: March 07, 2013, 06:38:19 AM »
ReplyReply

The shorter lenses you use, the more of a problem the less rigid design of that 5x4" camera will be, the problem is that it is hard to avoid accidental tilts, a fraction of a degree of tilt between lens board and sensor can be visible on a short focal length. But for product photography using longer focal lengths it will work okay.

I'd look for a sliding back that fits in there, check on ebay for example.
« Last Edit: March 07, 2013, 06:42:31 AM by torger » Logged
pixjohn
Sr. Member
****
Offline Offline

Posts: 675


« Reply #3 on: March 07, 2013, 02:15:19 PM »
ReplyReply

The camera has graflok adapter, just buy an apter with your back mount.
Logged
MrSmith
Sr. Member
****
Offline Offline

Posts: 922



WWW
« Reply #4 on: March 07, 2013, 02:19:33 PM »
ReplyReply

Doesn't look like a Sinar to me as it has axis tilts, looks like a Horesman (same panel fitting but with a sliding clip on the bottom not just the top.)
Logged
Chris Barrett
Sr. Member
****
Offline Offline

Posts: 283


« Reply #5 on: March 07, 2013, 02:24:24 PM »
ReplyReply

If I remember correctly, the Horseman could swap boards with Sinar, so you should be in decent shape with adapters.
Logged
ced
Sr. Member
****
Offline Offline

Posts: 268


« Reply #6 on: March 08, 2013, 02:40:49 AM »
ReplyReply

MrSmith my reference to Sinar was the spelling of the name of the back in question,  I don't think Sinar ever made such a flimsy device...
Logged
yaya
Sr. Member
****
Offline Offline

Posts: 1150



WWW
« Reply #7 on: March 08, 2013, 03:53:36 AM »
ReplyReply

It's a Horseman LE or LX as far as I can tell. It uses a standard Graflok mount or a Sinar mount so you have several options

If you're going to use Live View and only need a direct adapter then we (Mamiya Leaf) makes Graflok adapters for Mamiya, Contax, Hasselblad H, Hasselblad V and also AFi/ Hy6 backs. The adapter can be ordered through any of our partners. Cambo also make a direct adapter for Sinar cameras

If you're looking for a sliding back with a ground glass then you can get one from Cambo, Linhof, Kapture Group, Mergin-X, Silvestri and a few nameless eBay companies

As others suggested the camera should be OK for studio work with long-ish lenses. If you plane to use wide-angle lenses then I suggest you look for a more compact and rigid camera or a tech camera

BR

Yair
Logged

Yair Shahar | Product Manager | Mamiya Leaf |
e: ysh@mamiyaleaf.com | m: +44(0)77 8992 8199 | www.mamiyaleaf.com | yaya's blog
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad