Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: IPF 8300 Print Length  (Read 678 times)
deanwork
Sr. Member
****
Offline Offline

Posts: 736


« on: March 23, 2013, 10:58:38 AM »
ReplyReply

Does anyone know what the maximum print length that the 8300 out of the Canon plug-in is capable of?

I have a job that will be somewhere in the realm of 16" x 10 feet. I'm wondering if I can do this on the Canon.

john


Logged
Jeff Magidson
Full Member
***
Offline Offline

Posts: 148



WWW
« Reply #1 on: March 23, 2013, 12:32:46 PM »
ReplyReply

Does anyone know what the maximum print length that the 8300 out of the Canon plug-in is capable of?

I have a job that will be somewhere in the realm of 16" x 10 feet. I'm wondering if I can do this on the Canon.

john

John; Forum Member Keith Cooper made a 14 meter long print using the IPF8300 with the Canon Plug-in. You can read all the details here: http://www.northlight-images.co.uk/article_pages/14m_pano_print.html

~ Jeff

http://artslidesboston.com
Logged

~ Jeff Magidson
Custom Archival Printing
http://artslidesboston.com
deanwork
Sr. Member
****
Offline Offline

Posts: 736


« Reply #2 on: March 23, 2013, 10:08:05 PM »
ReplyReply

Thank you Jeff, and Keith...
Logged
Ernst Dinkla
Sr. Member
****
Offline Offline

Posts: 2886


« Reply #3 on: March 24, 2013, 02:19:29 PM »
ReplyReply

Best chance is on the Canon, on my plain Z3100 the limit is near 2.75 meter and Qimage can not help then. On my Z3200PS it is way over that size. printed over 5 meter so far. You could try on the Z3100 on cheap paper. If the image is say 3 feet wide and 11 feet long and the print is beginning the 3 feet wide may be cropped to less than one foot wide. That is an indication that it will not print above say 9 feet length in my experience.


--
Met vriendelijke groet, Ernst

http://www.pigment-print.com/spectralplots/spectrumviz_1.htm
December 2012, 500+ inkjet media white spectral plots.

Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad