Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Web modeule output Oversaturated when using a NEC 3090 monitor  (Read 375 times)
Paul2660
Sr. Member
****
Offline Offline

Posts: 1900


WWW
« on: April 13, 2013, 04:41:53 PM »
ReplyReply

I wanted to double check with this forum on this issue.  Whenever I use the web module to output images in LR4 (it was the same in LR3 also), after LR has created the thumbnails and before I would export the files, most of the images come back way over saturated.  Reds and blues espeically.  I am using a NEC 3090, calibrated with Spectraview software.  This is only happens on the web module, all of the others the view is fine.  If I take the same file and use LR on the same machine, but use a different monitor, like a HP 20" LCD, this does not happen and on my mabook pro 15" gen 2 machine, no problems, (under bootcamp or Mac).   

In regards to outputting from the web module, I most times just use the export button in the web module, I am not aware of a way to set a out put color space here like you can in normal exports.  Is there a place to tell LR to use sRGB for web output?


The files are imported into LR with Adobe sRGB (1998) or prophoto color space.  I have not tried converting the color space to sRGB first in CS and then doing the import, however that seems like a wasted process. 

Is there a setting in LR4 that I am missing here that would be causing this.  It seems to only happen if use the 30" NEC (win 7 64 bit) that I get this over saturated output, again web module only. 

Thanks
Paul Caldwell
Logged

Paul Caldwell
Little Rock, Arkansas U.S.
Photography > http://photosofarkansas.com
Blog> http://paulcaldwellphotography.com
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad