Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Settings for Epson 9600  (Read 532 times)
huguito
Full Member
***
Offline Offline

Posts: 237


« on: June 14, 2013, 12:48:02 AM »
ReplyReply

Where do I find the settings for the platen gap in the print menu?
I am using this printer with a windows XP
Thanks

Hugo
Logged
darlingm
Sr. Member
****
Offline Offline

Posts: 349


WWW
« Reply #1 on: June 14, 2013, 01:44:10 PM »
ReplyReply

IF the driver has a similar layout to the 9900, on the Main tab, click Paper Config.  Near the bottom is Platen Gap.
Logged

Mike Westland Printworks
Fine Art Printing Amazing Artwork Reproduction Photography
http://www.westlandprintworks.com (734) 255-9761
huguito
Full Member
***
Offline Offline

Posts: 237


« Reply #2 on: June 14, 2013, 03:37:49 PM »
ReplyReply

Thanks
I will look again, I think that option is not there but is worth looking again
Logged
Jim Metzger
Newbie
*
Offline Offline

Posts: 30


« Reply #3 on: June 16, 2013, 11:06:45 PM »
ReplyReply

The 9600 is the same feature set as the 7600 and the platen gap is set on the printer itself. Very easy to do. Page 2-19 in the manual, available online.

Press "select type" so PRINTER SETUP appears.
press the > key twice to get to platen gap.
use ^ and V arrow keys to set platen width.
Press ENTER
Press Pause to hold the setting. Don't forget to switch back to STANDARD when done.
Logged
huguito
Full Member
***
Offline Offline

Posts: 237


« Reply #4 on: June 18, 2013, 01:23:35 AM »
ReplyReply

Thanks very much
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad