Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Fuji X-E1 dead pixels?  (Read 1854 times)
Ludwig Nobel
Newbie
*
Offline Offline

Posts: 10


« on: July 27, 2013, 04:54:40 PM »
ReplyReply

Hi,

I already posted this on the Fuji Forum, perhaps somebody on LuLa has an idea whats going on with my camera.

I have a problem with my X-E1. Rows of corrupt pixels as in the attached image. These were shot with the 35mm. I am not sure if it is the camera or the SD-card, a SanDisk 32 GB Extreme Pro. I remember having read somewhere that a defect cart can cause this.

It does not show in all pictures, just in some of them. The location of the defect pixels is always different, so I tend to think it is not the sensor, but I am not sure.

Anybody seen this?

Ludwig

 

Greetings from Switzerland

Ludwig
Logged
k bennett
Sr. Member
****
Offline Offline

Posts: 1417


WWW
« Reply #1 on: July 28, 2013, 07:57:49 AM »
ReplyReply

Ouch. That's bad. I have not seen that on either of my XE1 cameras. It looks similar to corrupted files that I used to see when a card was going bad, but it's been many years since that happened to me.

Have you tried a different card and/or card reader?
Logged

Equipment: a camera and some lenses.
snoleoprd
Sr. Member
****
Offline Offline

Posts: 393



WWW
« Reply #2 on: July 28, 2013, 11:55:07 AM »
ReplyReply

I would definitely try a different card, make sure to format in camera. If the sensor was having stuck pixels they would stay in the same position. So try a different card or a faster card as well. I use the Sandisk extremes with the 95mb/s speed, it does make a noticeable difference.

Alan
Logged

Alan Smallbone
Orange County, CA
Ludwig Nobel
Newbie
*
Offline Offline

Posts: 10


« Reply #3 on: July 28, 2013, 12:38:56 PM »
ReplyReply

Thanks for answering.
The SanDisk Extreme is exactly the card I also use, as I wrote in my post.
I have tried another card, no dead pixels. Back to the SanDisk Extreme, no dead pixels...
The problem shows up randomly, that's why it is so difficult for me to diagnose.
I will wait and see, warranty will last another half year.

Ludwig
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad