Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: raw processing????  (Read 2205 times)
mgts517
Newbie
*
Offline Offline

Posts: 16


« on: October 04, 2005, 03:48:37 PM »
ReplyReply

Hi,
 I'm alittle new at this ,so,please be patient...
I'm shooting a raw image..process it threw canon file utility,adjusting color,contrast,exposure etc...
save the file as a 16 bit tiff...then open it in photoshop to sharpen.
In unsharp mask,my settings are
amount=400
radius=1
threshold=5

My in camera parameter settings are Parameter 1.
My problem is that the images are all pixelated,seem to be oversharpened.
 Am I correct in assuming,that being that my in camera settings are +1,that the images are already sharpened.and that my unsharp mask settings should be lowered?
I'm using a Canon 300D.
Any help woud be appreciated.
TNX,
Mike
Logged
Steven M Anthony
Newbie
*
Offline Offline

Posts: 47


WWW
« Reply #1 on: October 04, 2005, 04:55:17 PM »
ReplyReply

If you are shooting RAW, your parameter settings on the 300D are not applied to the image.  Try reducing your sharpening amount.  I use Photokit sharpener--so I forget what USM settings I used to use... but 400 seems high.
Logged

Steve

http://www.smaphoto.com/

Canon 10D
Tamron 28mm - 300mm
Epson R2400
mgts517
Newbie
*
Offline Offline

Posts: 16


« Reply #2 on: October 04, 2005, 06:27:59 PM »
ReplyReply

Thanks Steve,
For quick reply...I will take your advise & try somw different settings.
I spent over an hour at your website,you are a very talented photographer...with a tremendous eye.
I live in New York City,and have never seen such images,that you have managed to capture,even though I have driven by them a thousand times.
Really nice work...
Thanks again,
Mike
Logged
Jonathan Wienke
Sr. Member
****
Offline Offline

Posts: 5759



WWW
« Reply #3 on: October 05, 2005, 07:10:17 AM »
ReplyReply

Get over the idea that there is any "magic recipe" for sharpening that is appropriate for all images. Proper sharpening will vary depending on the camera, lens used, and the subject matter.
Logged

mgts517
Newbie
*
Offline Offline

Posts: 16


« Reply #4 on: October 05, 2005, 03:15:28 PM »
ReplyReply

I'm down to
 Amt=150
 Radius=1
threshold=5-10
 Looks like these are better starting points...
Thanks,
Mike
Logged
DiaAzul
Sr. Member
****
Offline Offline

Posts: 777



WWW
« Reply #5 on: October 05, 2005, 04:11:07 PM »
ReplyReply

Quote
I'm down to
 Amt=150
 Radius=1
threshold=5-10
 Looks like these are better starting points...
Thanks,
Mike
Canon's recommended is around Radius=0.3, Amt=100-150, Threshold=0.

Depending upon your RAW converter you need to ensure that the converter is not sharpening the image during the conversion - if so then reduce your USM accordingly.

If you have PS CS2 then you may wish to give smart sharpen a try with 'lens blur' setting and similar figures to the above as well.
Logged

David Plummer    http://photo.tanzo.org/
mgts517
Newbie
*
Offline Offline

Posts: 16


« Reply #6 on: October 06, 2005, 01:11:16 AM »
ReplyReply

I'm using photoshop elements2...and even that is greek to me.
Still learning .
I'll give your settings a try.
I do not use the sharpen feature in my conversion{file viewer utility} process. Suggestions  of any kind would be welcome.
Thanks for your help,
Mike
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad