Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: Don's Parts Replacement Belt for HP Z3100  (Read 203 times)
KevinMcD
Newbie
*
Offline Offline

Posts: 27


« on: August 22, 2014, 02:10:47 PM »
ReplyReply

I just received a replacement belt for my 24 inch Z3100 from Don's Replacement Parts on Ebay (link below).  I actually got the link here as an okay third party place to find the belt.  Looking at the belt, I notice that the teeth, go all the way around the belt.  On the video on Youtube and on the belt on the printer, I notice (and he mentions on the video) that you have a section with teeth and a section with ribs to go around the pulley.  Do you think this belt with teeth going all the way around will work?  Thanks.

http://stores.ebay.com/DONPARTS-STORE/HP-DesignJet-Parts-/_i.html?_fsub=350400019
« Last Edit: August 22, 2014, 02:14:17 PM by KevinMcD » Logged
Ernst Dinkla
Sr. Member
****
Offline Offline

Posts: 2845


« Reply #1 on: August 22, 2014, 02:46:00 PM »
ReplyReply

It works here on 2 machines. There is another wheel added to the new belt that should be used instead of the HP wheel at the left side. Also clean the toothed driving wheel at the right side that no debris stays between the teeth of that wheel.


--
Met vriendelijke groet, Ernst

http://www.pigment-print.com/spectralplots/spectrumviz_1.htm
April 2014, 600+ inkjet media white spectral plots.
Logged
KevinMcD
Newbie
*
Offline Offline

Posts: 27


« Reply #2 on: August 22, 2014, 02:49:24 PM »
ReplyReply

Thanks, Ernst!  Much appreciated.
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad