Ad
Ad
Ad
Pages: [1]   Bottom of Page
Print
Author Topic: The poverty/printer ink conundrum  (Read 6022 times)
situgrrl
Sr. Member
****
Offline Offline

Posts: 342


WWW
« on: January 26, 2006, 10:54:44 AM »
ReplyReply

My Epson 2100 uses ink very quickly and I can't afford it.  There are several CIS systems on the market from 80 - 250.  I want something of comparable quality to the epson inks.  Can anyone shed any light?

Thanks
C
Logged

Peter McLennan
Sr. Member
****
Offline Offline

Posts: 1695


« Reply #1 on: January 26, 2006, 11:32:21 AM »
ReplyReply

I've been using several CIS systems in several printers nearly trouble-free for over five years.  I use Generations 4 pigment inks from www.mediastreet.com.  

With a profile, you probably won't notice any colour differences.  They don't fade.  Period.  Other systems from MIS Associates have a good reptutation, too.  If you search this site and others, you'll find more info.

For desktop printers, if you want to actually print, especially images, and you're paying, a CIS is completely liberating.  Go for it.

Peter
Logged
mdijb
Sr. Member
****
Offline Offline

Posts: 397


WWW
« Reply #2 on: January 26, 2006, 01:42:16 PM »
ReplyReply

I can also vouch for the mediastreet systems and ink--I have used them on 3 different printers, including the 7600 and have been very pleased.  The print quality has been excellent and their tech support has been very helpful the few times I have needed them.  The cost savings are huge.

MDIJB
Logged

mdiimaging.com
situgrrl
Sr. Member
****
Offline Offline

Posts: 342


WWW
« Reply #3 on: January 27, 2006, 04:17:37 AM »
ReplyReply

I can't find a UK supplier for the mediastreet ink systems so I'm considering Lyson - I need to be able to get ink quickly when I'm out!

Most of the systems available sell the ink serperately from the hardware, has anyone tryed mixing and matching?  A complete setup is megabucks so I was thinking of skimping on the hardware and using good quality inks.
Logged

hughhill
Newbie
*
Offline Offline

Posts: 8


« Reply #4 on: January 27, 2006, 07:50:33 AM »
ReplyReply

I dont know where you live Situgrr, but the lagest computer market has a rep from Lyson there who demonstrates and sells their systems.
they are there every saturday just off Tottenham Court Road in the University City Hospital behind Chorlotte Street.
Once I get my 4000 sorted out I will be using them myself.
I dont know if this helps, buty I wish you luck.

Hugh

Quote
I can't find a UK supplier for the mediastreet ink systems so I'm considering Lyson - I need to be able to get ink quickly when I'm out!

Most of the systems available sell the ink serperately from the hardware, has anyone tryed mixing and matching?  A complete setup is megabucks so I was thinking of skimping on the hardware and using good quality inks.
[a href=\"index.php?act=findpost&pid=56879\"][{POST_SNAPBACK}][/a]
Logged
allan67
Jr. Member
**
Offline Offline

Posts: 69


WWW
« Reply #5 on: January 27, 2006, 01:54:59 PM »
ReplyReply

Hello,
I've been using InkRepublic CIS on my R1800 and found it very reliable.
After a year of usage I found no problems with it.
The construction quality is very good and setup is easy. I was up and running in about 30 mins.
Check it at http://www.inkrepublic.com/Index.asp
They provide their own inks or you can use inks from other manufacturers.
It's not a cheap system, but I think it's worth it.
Hope it helps.
Allan
Logged
DarkPenguin
Guest
« Reply #6 on: January 27, 2006, 02:50:23 PM »
ReplyReply

Quote
I've been using several CIS systems in several printers nearly trouble-free for over five years.  I use Generations 4 pigment inks from www.mediastreet.com

With a profile, you probably won't notice any colour differences.  They don't fade.  Period.  Other systems from MIS Associates have a good reptutation, too.  If you search this site and others, you'll find more info.

For desktop printers, if you want to actually print, especially images, and you're paying, a CIS is completely liberating.  Go for it.

Peter
[a href=\"index.php?act=findpost&pid=56826\"][{POST_SNAPBACK}][/a]

The last third party inks I tried clogged my 1280 solid.  Any problem with mediastreet's inks?
Logged
Peter McLennan
Sr. Member
****
Offline Offline

Posts: 1695


« Reply #7 on: January 27, 2006, 11:31:33 PM »
ReplyReply

Quote
The last third party inks I tried clogged my 1280 solid.  Any problem with mediastreet's inks?
[{POST_SNAPBACK}][/a]


I had one total clog of the black channel due to non-use.  I bought a new CIS and kept on printing.  I run an 1160 and an 880 with G4 inks.  Both have been running for nearly five years now.

I am debating long and hard whether or not to move to a CIS for my 4800.

situgrrl, you might see if MIS Associates  
[a href=\"http://www.inksupply.com/]http://www.inksupply.com/[/url]  
will ship to the UK.  I'm suprised that you can't get MediaStreet stuff.  

Peter
Logged
keithrsmith
Full Member
***
Offline Offline

Posts: 107


« Reply #8 on: January 28, 2006, 05:52:01 AM »
ReplyReply

you could consider getting some empty carts and refillinf them with your chosen ink -
http://www.weink.com/ecom/catalog/easy-fil...200_4439613.htm

I have the lyson CIS and Fotonic inks on a 2100 and am happy with the results, but unless you print quite a lot and often, the CIS can be a bit of a pain.

Keith
Logged
situgrrl
Sr. Member
****
Offline Offline

Posts: 342


WWW
« Reply #9 on: January 28, 2006, 01:23:15 PM »
ReplyReply

Keith your idea sounds very interesting.  I'll try really hard not to ask why a set of empty carts costs the same as genuine Epson ones with ink!  I don't quite understand the deal with chips though, you can buy a chip resetter for $10 so why do they sell 50 pks of those adhesive chips which "auto reset." Do I need both?  Why?

Thanks
Charlee
Logged

keithrsmith
Full Member
***
Offline Offline

Posts: 107


« Reply #10 on: January 29, 2006, 03:31:15 AM »
ReplyReply

In truth I don't know!  The spongeless refillable carts are quite new and I haven't tried them.  

keith
Logged
GreenApple123
Newbie
*
Offline Offline

Posts: 1


« Reply #11 on: September 22, 2006, 04:50:52 PM »
ReplyReply

I recently began using a website called Ink Replacement and have found them to be significantly cheaper than the manufacturer's ink prices and the quality has been great.  I think they are a pretty new site because I haven't seen them until recently but I was pleased with the company.
Logged
nigeldh
Jr. Member
**
Offline Offline

Posts: 56



WWW
« Reply #12 on: October 10, 2006, 11:08:45 PM »
ReplyReply

Quote
The last third party inks I tried clogged my 1280 solid.  Any problem with mediastreet's inks?
[a href=\"index.php?act=findpost&pid=56937\"][{POST_SNAPBACK}][/a]

I have been using the G Chrome pigment inks with my Epson 1280 for almost a year. I just make sure to print a couple of 8x12 prints every week to keep things flowing. I was having an issue with the ink not feeding, often yellow not printing, but then I raised the ink supply a bit more by putting the ink bottles and stand on a 50 sheet paper box. Getting the height of the bulk ink bottles is critical - too low and the ink doesn't refill the cartridges by capillary action. Too high and the ink floods the cartridges and the print head.

I got both the 1280 and the MediaStreet Niagara CIS as factory reburished units so together they were about the cost of a new 1280 and I get pigment ink - the stock 1280 uses dye ink and 5 colors in one cartridge. Just make sure that any ink feed bottles have a nipple fixed into the top of the ink supply bottle. Some systems just drill a hole and slip the ink feed tube in. Then the ink feed tube can get too high and the system will get an air lock.

Nigel
Logged
Pages: [1]   Top of Page
Print
Jump to:  

Ad
Ad
Ad